Servicing - Zanussi DI 180/80 Instructions For The Use And Care

Servicing
If, having followed these instructions
carefully, your machine fails to work
properly, contact your local Zanussi
Service Network, whose details can be
found by looking under «Z» in your local
telephone directory. Before you do that
though it is worth making a few simple
checks yourself.
Is the plug tirmly connected to the wall
socket and the socket switched on?
Check the power supply by plugging in
another appliance.
Check that there is not a power failure.
Switch on the house lights.
Is the fuse in the plug intact and are the
wires in the mains lead correctly
connected to the plug? (see page 13 for
Electrical connections).
Have you turned the thermostat to the
correct setting?
Has the door been left open causing the
temperature to rise?
If there are water drops on the bottom
of the fridge compartment, check that
the defrost water channel is clear.
IN-GUARANTEE CUSTOMERS
SHOULD ENSURE THAT THE
ABOVE CHECKS HAVE BEEN
MADE AS THE ENGINEER WELL
MAKE A CHARGE IF THE FAULT
IS NOT A MECHANICAL OR
ELECTRICAL BREAKDOWN.
* Please note that proof of purchase is
required for any in-guarantee service calls.
Replacing thje interior light bulb
Prior to undertaking this operation, be
sure to unplug the appliance from the
wall socket as a safety precaution.
If the interior light does not come on
when the door is opened, you will need to
gain access to the interior light bulb. To
do this, remove the bulb housing cover by
unscrewing the screw and by sliding it
out. Check that the bulb is correctly
screwed into its socket. If it is burnt out,
replace with a similar 10W bulb. Replace
the cover by sliding it back in. Fasten it
by means of the previously removed
screw.
23