Advertisement
First set the right side of the locking bar into the hole of the rear wall. When installing the left side, you
can first pull the lever of the spring catch. After aligning, let the lever go. Installation is complete.
When installing the lower door leaf, the upper door leaf can be tilted for making this step easier. First
install the right side, then the left side.
© by WilTec Wildanger Technik GmbH
http://www.wiltec.de
Figure 7
Figure 8
Figure 9
Item 63451–64259, 64851
Page 6
10 2023-1
Advertisement
