Download Print this page
Victory RS-1N-S7-FF Specifications

Victory RS-1N-S7-FF Specifications

Shallow depth refrigerators

Advertisement

Quick Links

Half Door, Pass-T T hru and Remote Models Available
Cabinet:
The cabinet front and doors are constructed
of heavy gauge polished stainless steel to
maintain an attractive appearance for years
of heavy use. Foamed-in-place polyurethane
insulation throughout the cabinet and doors
ensures the ultimate in energy efficiency.
Doors:
The self-closing doors are securely mounted
on rugged cam-lift hinges which have a
lifetime guarantee. Each door has a heavy-
duty cylinder lock and self-adjusting
magnetic gasket to prevent the cold air from
escaping. Humidity control wires located
around the door jamb prevent condensation
from forming on the cabinet front and are
concealed by a high impact, non-conductive
thermal breaker strip. The interior door liner
is constructed of durable ABS material
which resists denting and scratching and is
easy to clean. Each safety grip handle is
guaranteed for life. Interior lighting is
controlled automatically by a switch
mounted in the hinge.
Approvals:
Victory Refrigeration, Inc. I 110 Woodcrest Road I Cherry Hill, NJ 08003 USA I Phone: 856.428.4200 I Fax: 856.428.7299 I E-mail: sales@victory-refrig.com
Shallow Depth Refrigerators
RS MODELS —
Stainless steel
exterior and interior.
RS-2 2 N-S S 7
Shelving:
The heavy-duty wire shelves are adjustable
in one inch increments. A wide door opening
allows the use of a variety of optional pan
slide types for 12" x 20" and 14" x 18" pans
and trays.

Refrigeration System:

On two and three section models, the
selfcontained
refrigeration
mounted on top of the cabinet. The air
circulating fans and the forced convection
cooling coil are contained in an insulated
housing separate from the product zone
allowing for maximum food storage
capacity. All condensate water is disposed
of automatically by the energy efficient non
electric
condensate
plumbing is required.
NOTE: Single section model cooling coil is
contained within a ceiling mounted low profile
housing.
Project:
Location:
Item #:
Quantity:
RS-1N-S7
RS-2N-S7
RS-3N-S7
Standard Features
• Digital Thermometer/Battery Back-up
• Energy Saver Switch
• Stainless Steel Case Front, Door(s) and
Sides
• Heavy-Duty Lifetime Cam Lift Hinges
• Adjustable Wire Shelves
• Adjustable Stainless Steel Legs
• Lifetime Safety Grip Handle(s)
• Self-Closing Doors with Safety Stops
• Flush Mounted Automatic Interior Lighting
• Energy Saving Thermal Breaker Strips
• Door Opening Accepts 12" x 20" and 14" x
18" Pans
• Heavy-Duty Cylinder Locks
• One Piece Self-Adjusting Magnetic Door
Gaskets
• High Impact ABS Interior Door Liner
• Plasticized Fin Coil
• Environmentally Friendly R-134a Refrigerant
• Condensate Automatically Evaporated
• Insulated Partitions
• Cord and Plug Attached on 115V Models 12
Amps or Less
Optional Features and Accessories
• Dial Thermometer
• Two Half Doors in Place of One Full Length
Door
• Full and Half Size Hinged Glass Doors with
Cylinder Locks
• Change Door Swing
• Adjustable Stainless Steel Wire Shelves
• Stainless Steel Angle Pan Slides
• Zinc Plated Wire Pan Slides
• 5" Diameter Heavy-Duty Swivel Casters with
system
is
Brakes
• Stainless Steel Case Back
• Fluorescent Lights
• Remote and Pass-Thru Models
evaporator,
no
are available online at www.victory-refrig.com.
Victory Refrigeration specification sheets

Advertisement

loading

Summary of Contents for Victory RS-1N-S7-FF

  • Page 1: Refrigeration System

    Interior lighting is controlled automatically by a switch mounted in the hinge. Approvals: Victory Refrigeration, Inc. I 110 Woodcrest Road I Cherry Hill, NJ 08003 USA I Phone: 856.428.4200 I Fax: 856.428.7299 I E-mail: sales@victory-refrig.com Shallow Depth Refrigerators RS MODELS — RS-1N-S7...
  • Page 2 Continuous product development may necessitate specification changes and design without notice. Victory participates in the KCL CADalog, the most current source of CAD symbols for foodservice designers worldwide. Symbols include standard equipment in plan, side, front and 3-D views, layered for FEDA/FCSI recommended guidelines.

This manual is also suitable for:

Rs-2n-s7-ffRs-3n-s7ffRs-1n-s7Rs-2n-s7Rs-3n-s7