Spirit Halloween Zombie Tech Squad SINISTER GOTHIC GARGOYLE Assembly And Operating Instructions

S G
INISTER
G
ARGOYLE
Assembly and Operating Instructions
WARNING: Do not turn prop on until fully assembled.
Stay clear of the prop while operating.
Keep all plastic and wire parts away from children.
Prop is intended for use with included
components. For optimum performance,
2 people are recommended for assembly.
FRAME:
A
A. Body C. Right Wing
B. Left Wing D. Screws x 4
1
B
C
A
Front
Left Right
Back
1. Gently slide the rectangular
ends of the (B) Left Wing and
the (C) Right Wing into the
corresponding rectangular slots
and holes on the (A) Body as
shown in Figure 1.
OTHIC
B C
E. Fog Hose
F. Moisture Trap Tank
2
B
D
2. Twist the (D) Screws onto the
exposed bolt screw tips, and
tighten to securely attach the
wings to the body. CAUTION: DO
NOT OVERTIGHTEN as shown in
Figure 2.
PARTS:
D
G. Adapter
ASSEMBLY
3
A
3. Optional: this item can be connected to most standard 400 Watt fog
machines (not included) to have fog come out of the gargoyle's mouth. To
achieve this function, insert the small end of the (E) Fog Hose into the Fog
Hose Attachment Hole located on the back of the Gargoyle Base, connect
the (E) Fog Hoses and the (F) Moisture Trap Tank together as shown, and
then attach the large end of the hose onto the nozzle of your fog machine
as shown in Figure 3.
When using the Fog Effect, Remove and Empty the (F) Moisture Trap Tank
as needed.
E
*AC Adapter Spec
G
Input: 100-240V AC 50/60Hz
Output: 5.9V 1.5A
A
F
F
E
1/3