Advertisement
Tilther XT
Assembly, Use & Maintenance
8360
955 Benton Ave., Winslow, ME 04901 • Phone: 1-877-564-6697 • Fax: 1-800-738-6314
Email: service@johnnyseeds.com • Web Site: Johnnyseeds.com
1
Advertisement
Table of Contents
Related Manuals for Johnny's Selected Seeds Tilther XT
Summary of Contents for Johnny's Selected Seeds Tilther XT
- Page 1 Tilther XT Assembly, Use & Maintenance 8360 955 Benton Ave., Winslow, ME 04901 • Phone: 1-877-564-6697 • Fax: 1-800-738-6314 Email: service@johnnyseeds.com • Web Site: Johnnyseeds.com...
- Page 2 955 Benton Ave., Winslow, ME 04901 • Phone: 1-877-564-6697 • Fax: 1-800-738-6314 Email: service@johnnyseeds.com • Web Site: Johnnyseeds.com Parts list: A. (1) Tilther XT Head K. (1) Grab Handle B. (1) Cable with Ball End L. (1) Adjustment Wrench (pre-installed) C.
- Page 3 ASSEMBLY: 1. Slide the Crossbar Pad (I) and Crossbar Cover (H) over the Wrench Storage Wooden Crossbar (J). Adjustment Wrench (L) may be stored on the crossbar cover in the provided loop. 2. Slot the dowel ends of the Wooden Crossbar (J) into the corresponding holes in the Main Handle bodies (F and G).
- Page 4 7. Attach Trigger (C) to Main Handle Body Right (F) using the Binding Screw (E) with Binding Post (D). Thread Cable (B) through the Eyebolts (Q) along Main Handle Body Right (F). 8. Attach drill (not included) to the drive shaft. Lower the cable mount bracket so that it rests on the back side of the drill.
- Page 5 ADJUSTING THE HANDLE POSITION: Handle offset distance and height can be adjusted through the hardware in the handle mounting bracket. Always double- check cable tension after making any adjustments to the handle position. ROUTING THE CABLE: 1. After feeding through 2.
- Page 6 • The Tilther XT should be used with the drill set on the lowest gear and on the highest torque setting, which is often indicated with a drill symbol.
Need help?
Do you have a question about the Tilther XT and is the answer not in the manual?
Questions and answers