--------------------------------------------------------------First Fold Line------Seal with tape------Do not staple--------------------------------------------------------------
Page 1
Double sifter tables have two different serial numbers - please list both. Please print clearly. -------------------------------------------------------------------------------Second Fold Line--------------------------------------------------------------------------- Place stamp here AyrKing Corporation 2013 Cobalt Drive Louisville, KY 40299-2417 --------------------------------------------------------------First Fold Line------Seal with tape------Do not staple-------------------------------------------------------------- Store Name: Store I.D.#:...
The model and serial numbers are on the data plate mounted on the machine. Record the model and serial numbers below. Breading tables with two machines will have two serial numbers. Refer to these numbers in any correspondence with AyrKing Corporation. Model _______________________________________________________________ Serial Number(s) ______________________________________________________ Note: All procedures listed on these pages are general use guidelines.
OPERATION (Numbers in parenthesis refer to parts view drawings) ASSEMBLY: • Begin each day with all components clean and thoroughly dry. • Place lug (6) in bottom rails, tight against backstop. • Place dough ball pan (7) in rails underneath motor compartment. •...
DAILY CLEANING (Numbers in parenthesis refer to parts view drawings) NEVER SPRAY MOTOR • Always disconnect power supply when servicing or cleaning machine. COMPARTMENT WITH WATER. • Remove top & bottom lugs (2 & 6), lug plug (1), brush cover (3), brush (5), sifter screen (4), and dough ball pan (7).
Page 7
BBSU4219 PARTS LIST EACH ITEM HAS DIFFERENT PART NUMBERS DEPENDING ON THE SIFTER MODEL ITEM PART # DESCRIPTION [NOMINAL SIZE] B101 LUG PLUG, PLASTIC B101S SILICONE LUG PLUG B639 S/S ROUND BREADING BOWL W/ HOLE 20” LONG BRUSH COVER W/ 2” ROUND COLLAR...
Page 8
BBS GENERAL PARTS & ACCESSORIES EACH ITEM HAS DIFFERENT PART NUMBERS DEPENDING ON THE SIFTER MODEL B219 BRUSH POST (LOCATED ON TOP OF TABLE) B219H WIRE SHELF BRUSH POST HANGER B146 P-SHAPED PLASTIC CLIP TO AFFIX POWER CORD TO SIFTER B171 USER’S MANUAL RECTANGULAR WIRE BASKET WITH HANDLE &...
Many problems have a simple solution. Please use this guide to help resolve operational difficulties. Visit www.ayrking.com/maintenance/ for DIY Guides. Contact AyrKing Corporation if unable to correct any problem. PROBLEM POSSIBLE SOLUTIONS Push bottom lug tight against backstop. Check dough ball pan level, empty if full.
(if required by AyrKing) or if the failure is determined not to be covered under this warranty, AyrKing will invoice the end user for the replacement part, shipping costs, and labor charges if applicable.
Page 12
The customer will also be responsible for securing a shipping agent to return the merchandise, plus all shipping fees incurred. Restocking Fees There are many costs involved in processing a return. AyrKing charges a 20 percent restocking fee for all items returned.
Need help?
Do you have a question about the BBSU4219 and is the answer not in the manual?
Questions and answers