Change Of Door Opening Direction - Satrap OECOPLAN 50 GS Manual

Table of Contents

Advertisement

Available languages

Available languages

r=)
Change of door opening direction
Should the setting-up or handling demand it, door-
opening direction can be refitted from right-handed to
left-handed.
Following operations are to be done on the basis of
figures and explanations:
• Break the circuit of the appliance.
• Take the covering of top door holder off, unscrew
the screws fixing the top door holder (2 pieces) and
take it off according to figure.
• Take the door off.
• Unscrew the screws fixing the lower door holder
(2 pieces) and remove it according to figure.
• Fix lower door holder on the other side.
• Fit the door to the lower door holding pin.
• To fit top door holder remove plastic coverings of
door holder holes carefully (e. g. with a knife) and
put them on the other side.
• Fix top door holder with 2 screws in the place set
free being careful that the edge of the door is
parallel with the side of cupboard.
• Put the covering of top door holder back.
• Put over the handle and the plastic nails on the
other side.
In case you do not want to perform the procedures
above,
call
the
nearest
brand-mark service.
Technicians will accomplish the refitting expertly for
charge.
48

Advertisement

Table of Contents
loading

This manual is also suitable for:

Fb 501

Table of Contents