Advertisement
Quick Links
Advertisement
Summary of Contents for 3M PELTOR ComTac 7
- Page 1 Tactical Modular Audio System...
- Page 2 Important Read First! Please read and follow this document in conjunction with the User Instructions for your relevant components: 3M™ SCU/RCU-300, 3M™ ComTac™ VII Headset, and/or 3M™ Tactical Earplug TEP-300. Pay particular attention to warning statements. ¡Importante, leer primero! Leer y seguir las indicaciones de este documento junto con el manual de instrucciones de los componentes relevantes.
- Page 3 3M™ PELTOR™ Tactical Modular Audio System 17-37 38-58 59-79 80-100...
- Page 4 QUICK START GUIDE FOR TACTICAL MODULAR AUDIO SYSTEM OVERVIEW A TEP-300 COMTAC™ VII SCU-300 RCU-300 3, 7-15 4-15 3-15...
- Page 5 TEP-300 Beeeeep Beeeeep Beeeeep SCU-300 ComTac VII RCU-300 Radio Beep Beep SCU-300 ComTac VII RCU-300 Radio ON ~ 3 sec ~ 0.5 sec OFF ~ 3 sec 7→ 4→...
- Page 6 COMTAC ™ <3 mm...
- Page 7 ON ~ 2 sec OFF ~ 2 sec Beeeeep Beeeeep Beeeeep SCU-300 Beep Beep ComTac VII RCU-300 SCU-300 ComTac VII Radio RCU-300 Radio SCU-300 ComTac VII RCU-300 SCU-300 Radio ComTac VII RCU-300 Radio ~ 0.5 sec Menu Menu Menu Ambient listening mode ~ 0.5 sec ~ 0.5 sec...
- Page 8 Ambient listening mode NA/ANZ: 915 MHz EU: 864 MHz ~ 0.5 sec NIB VOX ~ 0.5 sec ~ 0.5 sec NIB OFF NIB PTT 7→ 7→...
- Page 9 SCU-300...
- Page 10 Radio Connected Beeeep Beeeep Beeeep ON ~ 3 sec ~ 2 sec SCU-300 -300 ComTac VII RCU-300 Radio SCU-300 EP-300 ComTac VII RCU-300 Beep Beep Radio SCU-300 -300 ComTac VII RCU-300 Radio SCU-300 TEP-300 ComTac VII RCU-300 Radio ~ 10 sec Beep Beep 9→...
- Page 11 RCU-300 Menu ~ 0.5 sec Primary/Secondary RCU Connected max 2...
- Page 13 HOT MIC ~ 0.5 sec ~ 0.5 sec...
- Page 14 ~ 0.5 sec max 2 Tactical Modular Audio System...
- Page 15 Tactical Modular Audio System Ch. 1 Ch. 1.1 Ch. 1.2...
- Page 16 Tactical Modular Audio System Ch. 1 Ch. 2 Ch. 1.1 Ch. 1.2 Ch. 2.1 Ch. 2.2...
- Page 17 Tactical Modular Audio System Ch. 1 Ch. 2 Ch. 1.1 Ch. 1.2 Ch. 2.1 Ch. 2.2...
- Page 19 1.1. INTENDED USE The 3M™ PELTOR™ Tactical Modular Audio System (TMAS) is comprised of the System Control Unit (SCU-300), the Remote Control Unit (RCU-300), the ComTac™ VII headset and/or the Tactical Earplug (TEP-300). The SCU-300 connects all products in the system and controls various functions of the products.
- Page 20 Please read, understand, and follow all safety information in these instructions, and in the User Instructions for your relevant TMAS components: SCU-300, RCU-300, ComTac™ VII, and/or TEP-300, prior to use. Retain these instructions for future reference. For additional information or any questions, contact 3M Technical Services. Refer to contact information listed on the last page of this manual.
- Page 21 3.2. COMTAC™ VII A Headband B Headband cable C Ear cushion D Foam liner E Headband wire F Guide G Communication microphone connector H Communication microphone I Communication microphone arm J Adjustable screw K Environmental/Ambient microphone L + button M NIB button N - button O Earcup P Battery compartment cover...
- Page 22 3.3. SCU-300 A Intercom socket G + button B Headset socket H - button C Radio 1 socket I On/Off/Menu button D Radio 2 socket J Function button E PTT I button K Battery cap F PTT II button L Metal clip 3.4.
- Page 23 TACTICAL MODULAR AUDIO SYSTEM 4.1. OPERATING TEMPERATURE -20°C/-4°F to 50°C/122°F. 4.2. START SEQUENCE To operate the 3M™ PELTOR™ Tactical Modular Audio System, make sure to fit and power on the system components in the correct sequence. For more detailed instructions, refer to the User Instructions for the system components.
- Page 24 4.4. TO FIT THE RCU-300 1. Pull and lift the locking bracket of the RCU-300 outwards and upwards. ON ~ 3 sec IMPORTANT! Make sure that the RCU-300 is placed within arm-length from the SCU-300. OFF ~ 3 sec Beep Beep Beeeeep Beeeeep Beeeeep Note: The earplugs will indicate that the product is on/off with 2.
- Page 25 TO PAIR AND CONNECT THE SYSTEM 4.7. TO POWER ON THE SCU-300 If the SCU-300 was previously connected to the TEP-300 or 5.1. TO PAIR THE RCU-300 TO THE SCU-300 ComTac™ VII, the devices will connect automatically when RCU-300 uses Bluetooth Low Energy communication.
- Page 26 SCU-300 with 2 short beeps. For more information refer to User 10. While pressing the buttons on the RCU-300, hold the Instructions for 3M™ PELTOR™ Tactical Modular Audio System. RCU-300 against the SCU-300 to pair. Note: If not previously connected to the SCU-300, the TEP-300 must be paired manually.
- Page 27 5.3.1. TO CONNECT THE TEP-300 TO THE SCU-300 The headset indicates that the product is connected to the FOR THE FIRST TIME SCU-300 with 2 short beeps. For more information refer to User Instructions for 3M™ PELTOR™ Tactical Modular Audio 1. Fit the earplugs. System. NOTE: Make sure that the TEP-300 is correctly fitted.
- Page 28 2. Align the markings on the cable to the markings on the SCU. IMPORTANT! Make sure to select the correct socket on the SCU-300 for the intercom system. ~ 10 sec The ComTac™ VII will indicate pairing. 3. Connect the cable with the SCU-300 and turn the cable •...
- Page 29 6.2. TO ADJUST THE RADIO/INTERCOM VOLUME USING THE SCU-300 OR RCU-300 1. Short press both + and - buttons simultaneously. 1. Double tap on the NIB button to access the NIB menu. ~ 0.5 sec 2. Press either the + or – button to within 2 seconds to change the volume level on connected devices.
- Page 30 7.1.2. NIB PTT To be able to operate the Function button on the RCU-300, change the settings on the SCU-300. Refer to “7.3.2. To 1. Press and hold the NIB button when speaking into the transfer the function button to the RCU-300”. microphone.
- Page 31 • Short press the - button to move forward in the menu required, and the user prefers a passive hearing protection system. device, such as the 3M™ E-A-R™ Classic™ Earplug. • Short press the + button to confirm or to access a WARNING! DO NOT use the headset in Earplug Mode sub-menu.
- Page 32 MENU FUNCTIONS COMTAC™ VII 9.5. AUTOMATIC POWER OFF The headset is equipped with an auto shut-off to save battery 9.1. AMBIENT (ENVIRONMENTAL) LISTENING life if the user forgot to power off after use. This function can MODE be turned off in the menu. •...
- Page 33 10. MENU FUNCTIONS SCU-300 Note: This menu level is only available when a primary RCU-300 is already connected to the SCU-300. 10.1. RADIO VOLUME 10.4.11. BLUETOOTH PAIRING** ® Adjusts the volume of connected external Pair the selected Bluetooth unit with the SCU-300. ®...
- Page 34 each others’ NIB range. • Slot area approximately 150 m. Each person with a NIB system has a slot area of approximately 150 m range. There are 4 open slots for transmitting within each slot area. This means that 4 people are able to transmit at the same time within the slot area.
- Page 35 Buttons on the RCU-300 for this scenario: • The - button is PTT for radio 2, channel 2. • The PTT I button is PTT for channel 1. Buttons on the RCU-300 for this scenario: • The PTT II button is PTT for channel 2. •...
- Page 36 Ch. 1 Ch. 1.1 Ch. 2 Ch. 1.2 Ch. 2.1 Ch. 2.2 PTT symbol explanation: Radio 1, channel 2 and Radio 2, channel 2 are listen only. PTT for internal intercom PTT for radio in external vehicles 11.3.2. INTERCOM + TWO RADIOS, MULTIPLE RADIO CHANNELS Buttons on the SCU-300 for this scenario: •...
- Page 37 12. TROUBLESHOOTING 12.1. TEP-300 Problem Solution The TEP-300 will not Place the earpieces in the charging case and perform a battery status check. Charge the power on. earpieces if needed. Charge the TEP-300 if needed. Refer to the User Instructions for TEP-300. Ensure you are pressing the Power Button for a minimum of three seconds.
- Page 38 Make sure the SCU-300 is correctly fitted and aligned with ComTac™ VII. Refer to the manual for “3M™ PELTOR™ Tactical Modular Audio System”. Make sure the products in the 3M™ PELTOR™ Tactical Modular Audio System has been started in the correct order. Refer to the manual for “3M™ PELTOR™ Tactical Modular Audio System”.
- Page 39 I cannot control the Make sure there are fully charged batteries in the SCU-300. system with the Check the battery level of the RCU-300. Refer to “10.4.1. Battery status”. RCU-300. Pair the SCU-300 to the RCU-300. Refer to “5.1. To pair the RCU-300 to the SCU-300”. Make sure that you are using the correct RCU-300.
- Page 40 Australia Greece Poland United Arab Emirates 3M Australia Pty. Limited 3M Hellas Limited 3M Poland Sp. z o.o. 3M Gulf Ltd Building A, 1 Rivett Road Κηφισίας 20 Aleja Katowicka 117, 05-830 P.O. Box 20191 Building 11, North Ryde, N.S.W. 2113 151 25 Μαρούσι,...
- Page 41 E-mail: techassist@mmmcom.au 3M is a trademark of 3M Company, Website: www.3M.com/au/PPESafety used under license in Canada. PELTOR is a trademark of of 3M Company, 3M New Zealand Ltd used under license in Canada. 94 Apollo Drive, Rosedale, 0632 Customer Service: 0800 252 627 Patent: www.3M.com/patent...