Table of Contents
Advertisement
Quick Links
Advertisement
Table of Contents
Subscribe to Our Youtube Channel
Summary of Contents for G-L-T Led Control 306
- Page 1 Led control 306 Led Control 306 Instructions for use...
-
Page 2: Before You Begin
Led control 306 1. Before you begin Thank you for purchasing this GLT light controller. In the box are the following: 1x Led Control 306 Controller 1x External Power Supply 1x Instruction manual Carefully unpack the product, and check that all items are present and in good condition. -
Page 3: Description Of The Front Panel
Led control 306 3. Description of the front panel Color fade buttons Auto & Sound and And LED indicators LED Indicator LED Indicator Fixture Buttons Color Macro Buttons Chases and Primary Colors Sensitivity And LED indicators And LED indicators LED Indicator Knobs &... -
Page 4: Description Of Functions
Led control 306 4. Description of functions Pimples Description <FIXTURES 1>– Projector number selection button. Press once to select the projector. Tap again to deselect it <FIXTURES 6> Selected projectors switch to Color Fade mode <Color Fade> Color Macro Mode Selector Button <Color Macro>... -
Page 5: Dmx Addressing
Led control 306 gold Brightness in Color Fade, Chase, Auto, Color Macro, and Preset modes <Blue> Blue dimming in Manual mode Control Fader of: <Strobe Speed> Strobe speed in Color Fade, Chase, Auto, Color Macro modes gold Amber and Strobe Dimming in Manual Mode <Amber>... -
Page 6: Using The Controller
Led control 306 The controller uses an addressing system intended only for projectors with the following Dmx protocol: · Channel 1 – Red · Channel 2 – Green · Channel 3 – Blue · Channel 4 – Amber · Channel 5 – White ·... - Page 7 Led control 306 White Violet Blue Green Amber No color Select the devices to be controlled using the "Fixture" buttons Press the "Color Macro" button Use the "Master DImmer" fader to adjust the intensity Use "Speed Time" to change colors Use "Strobe Speed"...
- Page 8 Led control 306 Use the faders for color mixing Use the flash buttons above the faders to send as long as the knob is held, a 100% level To exit Manual Mode, press another Mode button 7.7 Mode Chase Chase mode allows you to start crossfade-type sequences, which can be set in terms of execution speed, sequence time and intensity.
- Page 9 Led control 306 Audio mode uses the built-in mic to control the execution of sequences in Color Fade, Auto, and Chase modes. It does not apply to Color Macro, Preset, or Manual modes. While running, it is possible to use audio mode for some devices, and use Manual or Preset...
- Page 10 Led control 306 IM PORTER B&KLUMITEC 2 rue Alfred Kastler Zone Industrielle 67850 Herrlisheim - France + 33 (0) 3.88.96.80.90 + 33 (0) 3.88.96.48.46 hello@bklumitec.com www.bklumitec.com...
Need help?
Do you have a question about the Led Control 306 and is the answer not in the manual?
Questions and answers