Advertisement
Quick Links
Advertisement
Related Manuals for TechniSat SMARTTENNE 5 HD
Summary of Contents for TechniSat SMARTTENNE 5 HD
- Page 1 User manual SMARTTENNE 5 HD Universal omni-directional DVB-T2 active antenna.
- Page 2 1 Foreword This manual will help you to use your device, hereinafter referred to as SMARTTENNE 5, antenna, device or product, safely and as intended. 1.1 Target group The instruction manual is intended for any person who is involved in setting up, operating, cleaning or disposing of the device.
- Page 3 Attention!: The device must only be connected to a mains supply of 100-240 V, ~50/60 Hz. Never attempt to use the device to operate at any other voltage. The antenna is designed for outdoor use. In case of a noticeable malfunction of the device, the appearance of odors or smoke, serious malfunctions, damage to the housing, please turn off the device and contact the service center.
- Page 4 all kinds of prohibitions, regulations and warnings given by personnel of the place where you want to use the device. When the power adapter is not used for a long time, unplug it from the power outlet by holding the case, not the power cord. For pluggable devices, the connection socket should be mounted close to the device and should be easily accessible.
- Page 5 1.2.3 Legal information TechniSat Digital Sp. z o.o. hereby declares that the radio equipment type SMARTTENNE 5 (76-4837-00) complies with the directive 2014/53/EU and RoHS 2011/65/EU. The full text of the EU declaration of conformity is available at the following website: http://konf.tsat.de/?ID=24688.
- Page 6 2 SMARTTENNE 5 description 2.1 Contents of set Before starting, make sure to check if the scope of delivery is complete: 1x SMARTTENNE 5 omnidirectional antenna 1x Mounting arm for mast or wall 1x Mast clamp 1x Antenna cable - 10m 1x 12V/200mA power supply 1x Signal amplifier 1x User manual...
- Page 7 Mounting on a balcony railing: > After mounting the antenna outside, please connect the antenna cable to the F connector on the antenna. Pay attention to the rubber seal, which s hould be slid onto the F connector after screwing in the securing screw. >...
- Page 8 VHF 174-230 MHz, UHF 470-694 MHz Max. output power 105 dBuV Output impedancy 75 Ohm 5 Manufacturer TechniSat Digital Sp. z o.o. ul. Poznańska 2, Siemianice 55-120 Oborniki Śląskie 6 Technical parameters of the power supply Manufacturer TechniSat Digital Sp. z o.o.