Troubleshooting - ProBreeze Fabric Steamer 850 Instruction Manual

Table of Contents

Advertisement

TROUBLESHOOTING

Problem
Possible Causes
The steamer is not plugged in.
Switch is not
illuminated when
The household circuit breaker has
turned on.
been tripped; there is a blown fuse
in the electrical circuit.
The steamer heats
The water reservoir is empty.
up but there is no
steam.
There is mineral or lime scale
buildup in the steamer.
The steamer flow
There is mineral buildup in the
light is flashing
steamer.
DISPOSAL
This marking indicates that this product should not be disposed of
with other household waste through the EU. This is to prevent
possible harm to the environment and human wellbeing. Contact
your local authority for information regarding the collection systems
available. If possible, recycle it responsibly to promote the
sustainable reuse of resources.
Solution
Plug the steamer power cord
into an electrical outlet.
Reset the household circuit breaker or
replace the blown fuse. Contact an
electrician or your area's electrical provider.
Refill the water reservoir.
Remove the mineral buildup.
It is normal for the flow of the steam to
stop for a few seconds. If it stays off for
longer periods, check for mineral buildup.
English | 6

Advertisement

Table of Contents
loading

This manual is also suitable for:

Pb-s01

Table of Contents