Cleaning And Maintenance; Disposal - Thermrup MHP621 Instruction Manual

• The four T-LED shows the remaining capacity of the battery. (If the battery is full,
all four T-LEDs light up)
• After 30 seconds, the power button will go into power-saving mode and the LED
indicator will darken, but the heating function will continue. Briefly press the
power button again to unlock it from power-saving mode. You can then set your
desired level as described above.
• Press the on / off switch for approx. 2 seconds to switch off the heating function.
** Stop using it if you see redness on your skin. Excessive heat can cause burns!
4.4 Main Operation
• Connect the charger and the cable of the belt with the
adapter cable
• Press the controller's power button for approx. 2
seconds to switch the controller on.
• Then press the power button briefly (several times if
necessary) to set the desired temperature level (1-2-3,
red-green-blue).
• Press the power button for approx. 2 seconds to switch off the controller.
• After use, remove the belt from the charger.
*** Please only use the supplied charger***

5. Cleaning and maintenance

· Before cleaning, disconnect the heat belts from the Battery or power
supply.
· Never use aggressive cleaning agents or strong brushes.
· The belt can be washed in the washing machine up to 45 ° C.
· The belt must not be dried or ironed in a dryer.

6. Disposal

This product must not be disposed together with the domestic waste. All
users are obliged to hand in all electrical or electronic devices, regardless of
whether or not they contain toxic substances, at a municipal or commercial
collection point so that they can be disposed of in an environmentally
acceptable manner. Consult your municipal authority or your dealer for
information about disposal.
9