Advertisement
Quick Links
SUMAKE
Air Flux Chipper With 35mm Flat Chisel
Specification:
Blow Per Minute
Chisel Shank
Piston Stroke
Overall Length
Air Consumption
Air Inlet (PT)
Air Hose (I.D.)
Air Pressure
Net Weight
SUMAKE INDUSTRIAL CO., LTD
4F,NO.351,Yangguang St.,Neihu District TAIPEI, TAIWAN, ZIP:114-91
PNEUMATIC TOOLS
ST-2552
2,700 b.p.m.
Square
33mm
11-39/64" (295 mm)
10 CFM (285 L/min)
1/4" (6.35 mm)
3/8" (10 mm)
90 psi (6.3 bar)
5.72 lbs (2.6 kg)
Noise and Vibration:
Vibration
EN ISO 28927-9
Sound Pressure Level
Load:
23.6 m/s²
Sound power level
Uncertainty
²
K= 1.5 m/s
Noise
EN ISO 15744
Please always
load: 92 dB(A)
protector at
environment
load: 103 dB(A)
noise level > 80
dB(A) due to
risk of impaired
Uncertainty
K= 3dB
ST-2552-S-1510E-JIF
Remark
wear ear
hearing!
Advertisement
Summary of Contents for Sumake ST-2552
- Page 1 Air Hose (I.D.) 3/8” (10 mm) risk of impaired Uncertainty Uncertainty hearing! Air Pressure 90 psi (6.3 bar) ² K= 1.5 m/s K= 3dB Net Weight 5.72 lbs (2.6 kg) SUMAKE INDUSTRIAL CO., LTD 4F,NO.351,Yangguang St.,Neihu District TAIPEI, TAIWAN, ZIP:114-91 ST-2552-S-1510E-JIF...
- Page 2 DECLARATION OF CONFORMITY SUMAKE INDUSTRIAL CO., LTD. 4F, No. 351, Yangguang St., Neihu District, Taipei City, Taiwan declare in sole responsibility that the equipment Equipment： AIR FLUX CHIPPER WITH 35MM FLAT CHISEL Model/ Serial No.：ST-2552 to which this declaration applies, complies with these normative documents: ...
- Page 3 Low revolution rate Not enough air pressure Check air pressure Air leakage form the tool Check all connect points and repair efficiency Motor running abnormal or Not enough lubrication, cylinder, Lubricate or replace parts unusual noises occur piston damaged ST-2552-I-2005D-JI...
- Page 4 ST-2552 AIR FLUX CHIPPER PARTS LIST No. Parts No. Description Q'ty No. Parts No. Description Q'ty 2552-01 Valve Cap 2552-14 Clamp Only 2552-02 2552-15 Rubber Handle Grip O-Ring - Valve Cap (D7.8xW2.4) 2552-03 Valve Spring 2552-16 Cylinder Body 2552-04 Valve Stem 2552-17 Ball (7/16")
Need help?
Do you have a question about the ST-2552 and is the answer not in the manual?
Questions and answers