Table of Contents
Advertisement
Quick Links
Advertisement
Table of Contents
Subscribe to Our Youtube Channel
Summary of Contents for SMARTFOX SMARTFiciX Pro Charger
- Page 1 Operating instructions SMARTFiciX Charger...
- Page 2 © DAfi GmbH 2022 All rights reserved. We have checked the contents of this documentation for conformity with the hardware and software described. Nevertheless, deviations, remaining errors and omissions cannot be ruled out, so that we accept no liability for any damage that may arise as a result.
-
Page 3: Table Of Contents
TABLE OF CONTENTS Introduction............................7 Foreword...........................7 Contact details...........................7 Labelling ............................8 Technical data ...........................9 Warranty and liability......................10 Content and purpose of this documentation .................11 Validity ............................11 Recommendation ........................11 Limits of use ............................12 Intended use..........................12 Reasonable foreseeable misapplications................12 Application limits........................13 Target group and previous knowledge ...................13 Principle...........................13 Security............................14 Classification of document conventions .................14... - Page 4 Wiring diagram with SF Pro ......................41 Connection of a charging station ....................41 Connection of several charging stations (max. 5)..............42 Second control level (SMARTFOX Energy Meter) several charging stations ......43 Connection manual switch (optional)..................44 Control via SMARTFOX Pro Energy Management................45 Required articles........................45 Registration web portal my.smartfox.at .................45...
- Page 5 10.7 Decommissioning ........................84 10.8 Disassembly..........................84 10.9 Disposal ...........................85 11 Appendix ............................86 11.1 Drawings - Drilling template (unit: mm) .................86 11.2 Spare and wear parts ......................87 11.3 List of units ..........................87 11.4 Packaging icons ........................88 11.5 EU Declaration of Conformity....................89 11.6 Notes ............................90 List of figures Figure 1 CE mark ............................8...
- Page 6 Description V2.4 24.02.2022 Operating Instructions SMARTFOX Pro Charger © Copyright This original documentation is protected by copyright. All rights reserved, in particular the right of reproduction and distribution as well as translation. No part of this manual may be reproduced in any form (by photocopy, microfilm or any other process) or stored, processed, duplicated or distributed using electronic systems without written permission from DAfi GmbH.
-
Page 7: Introduction
1.2 Contact details If faults occur in the product, the cause of which you cannot rectify on the basis of this documentation, please contact SMARTFOX Support. DAfi GmbH Niedernfritzerstraße 120 5531 Eben im Pongau T: +43 (0)6458 20 160 support@smartfox.at... -
Page 8: Labelling
Operating Instructions SMARTFOX Pro Charger 1.3 Labelling The product is clearly identified by the contents of the type plate. CE marking acc: • Directive 2014/35/EU of the European Parliament and of the Council on the making available of electrical equipment designed for use within certain voltage limits •... -
Page 9: Technical Data
Operating Instructions SMARTFOX Pro Charger 1.4 Technical Data Order number EAN 0767523866314 Charging point Type 2 cable, 5m length gross, 4.7m (net), 1.3kW-11kW Safety element Integrated 6 mA DC fault current detection Supply** 1~: 16A3~ : 16A Backup** LS 3-pole C 16/20A**; RCD protection type A 30 mA... -
Page 10: Warranty And Liability
Operating Instructions SMARTFOX Pro Charger 1.5 Warranty and Liability The warranty period for the charging station is 2 years and begins with the commissioning. These operating instructions are intended to ensure trouble-free and safe use of the product; compliance with these instructions is a prerequisite for the fulfilment of any warranty claims. -
Page 11: Content And Purpose Of This Documentation
1.7 Validity This manual is exclusively for the product in question with the identifier SMARTFOX Pro Charger, of the company DAfi GmbH, is valid. The product was placed on the market by DAfi GmbH. 1.8 Recommendation We recommend that you have repairs and maintenance work carried out either by DAfi GmbH or by our certified SMARTFOX partners, who are familiar with and trained in our products, thus offering you the best possible service. -
Page 12: Limits Of Use
Use the product as intended and in a safety-conscious manner. Have faults and damage that may affect safety rectified immediately by DAfi GmbH or a certified SMARTFOX partner. 2.2 Reasonable foreseeable Misapplications The charging station must be mounted on a wall or stand (art. no. 0767523866345) and be stationary. -
Page 13: Application Limits
We recommend appropriate certification as a SMARTFOX partner with DAfi GmbH. Specialist personnel (Certified SMARTFOX Partners) Commissioning, maintenance, repair, service, inspection, configuration and servicing work may only be carried out by certified SMARTFOX partners. The qualified personnel must have read and understood these operating and maintenance instructions. 2.5 Principle The product corresponds to the state of the art and the applicable safety and health regulations. -
Page 14: Security
Operating Instructions SMARTFOX Pro Charger 3 Security This documentation is structured according to the applicable EU regulations and contains safety instructions. The operator of the product must receive the necessary safety-related information and also read the documentation. Individuals are responsible for complying with the safety instructions. -
Page 15: Notes
Operating Instructions SMARTFOX Pro Charger 3.1.2 Notes Notes contain important information about a product, the handling of the product or the respective part of the documentation to which special attention should be drawn and which, if disregarded, may have adverse consequences which, as a rule, could endanger persons or the product only in exceptional and individual cases. -
Page 16: Warning, Mandatory And Prohibition Signs Used
Operating Instructions SMARTFOX Pro Charger 3.3 Warning, mandatory and verb signs used 3.3.1 Warning sign Pictogram Meaning Designation W001 General warning sign W012 Warning of electrical voltage Warning signs Table 4 3.3.2 Commandment sign Pictogram Meaning Designation M001 General commandment sign... -
Page 17: General Safety Instructions
Maintenance work can be requested from DAfi GmbH and must be carried out by • them or a certified SMARTFOX partner. • After maintenance or repair, the product may only be put into operation with all guards fitted. - Page 18 Operating Instructions SMARTFOX Pro Charger NOTE Malfunction of the product Ensure cleanliness and purity in the area of the product. All objects and containers not required for the function must be removed from the area of the product. NOTE Lighting at the workplace For maintenance, repair and adjustment work, it may be necessary to equip the work area with an additional light source.
-
Page 19: Warning, Mandatory And Prohibition Signs On The Product
• Glass tube fuse for control electronics The charging station permanently measures the internal temperature. If the SMARTFOX Pro Charger is exposed to direct sunlight or is installed in a particularly exposed location (possible surface temperatures > 50 °C), it is possible that the charging current will be reduced or the charging paused for a short time in order to protect the temperature limits of the installed components. -
Page 20: Commissioning / Start-Up
Operating Instructions SMARTFOX Pro Charger 4 Commissioning / Commissioning Commissioning is covered in the following chapters. This includes requirements for transport, storage, the installation site, assembly and commissioning. 4.1 Transport The product is usually delivered to the customer by DAfi GmbH. -
Page 21: Assembly
Operating Instructions SMARTFOX Pro Charger The place of use must be designed for the weight of the product. In addition to its own • weight, the load caused by the unplugging and plugging process (dynamics) must be taken into account. -
Page 22: Scope Of Delivery
Operating Instructions SMARTFOX Pro Charger 4.5.1 Scope of delivery All SMARTFOX Pro Charger charging stations come with the following accessories: Assembly set consisting of: • 4x rubber cover cap (1) • Cable sealing gland: M20, M25, M32 one piece each (2) •... -
Page 23: Wall Mounting & Electrical Connection
Operating Instructions SMARTFOX Pro Charger 4.5.2 Wall mounting & electrical connection This chapter describes the wall mounting of the charging station. 1. Place the drilling template and a spirit level on the wall. 2. Make sure that the template is perpendicular. -
Page 24: Figure 3 Drilling Holes On The Wall
Operating Instructions SMARTFOX Pro Charger Drill the four marked holes at the marked points with a drill using a drill suitable for the wall construction. Figure 3 Drilling holes on the wall P a g e 24 | 92... -
Page 25: Figure 4 Mounting The Dowels
Operating Instructions SMARTFOX Pro Charger 4. Insert four dowels into the holes provided as far as they will go. Figure 4 Mounting the dowels P a g e 25 | 92... -
Page 26: Figure 5 Opening The Cover
Operating Instructions SMARTFOX Pro Charger 5. Now place the SMARTFOX Wallbox on a clean and dry surface and screw on the four TORX T25 screws with a suitable screwdriver. Be careful not to lose the screws. It is best to put them in the enclosed accessory box with the rest of the screws. -
Page 27: Figure 6 Removing The Connection Cable
Operating Instructions SMARTFOX Pro Charger 6. Cable variant - note socket: When opening the cover, disconnect the connecting cable of the LED board. Figure 6 Removing the connection cable P a g e 27 | 92... -
Page 28: Figure 7 Hole & Cable Entry From Behind
Operating Instructions SMARTFOX Pro Charger In the following step, a distinction must now be made between the supply line from behind (a) or below (b), based on the local conditions. Accordingly, the housing feed-throughs must be drilled out with a suitable step drill (c). If necessary, deburr the drill holes. Care must also be taken that no chips remain in the charging station. -
Page 29: Figure 9 Cable Entry Supply Line From Behind
Operating Instructions SMARTFOX Pro Charger 8. Now insert the supply cable and the cable of the RS485 connection into the station, according to the drilled openings from behind or below. Make sure that the cable entry is correct and complies with the legal requirements (sheath incl. -
Page 30: P A G E 3
Operating Instructions SMARTFOX Pro Charger 9. Now you can mount the wallbox on the wall. Observe the order of installation below: Dowel Screw Sealing washer Rubber cover cap Prepare the four screws incl. the sealing washers for installation (not included in the scope of delivery). -
Page 31: Figure 12 Connecting The Supply Line To The Terminal Block - 3-Phase Connection
Operating Instructions SMARTFOX Pro Charger 10. Now connect the supply line to the terminal block. Pay attention to the local conditions and the applicable technical connection requirements (TAEV). Connect the earth conductor (green/yellow), the neutral conductor (blue) and the phases L1, L2 and L3 with a maximum tightening torque of 1.2 Nm. -
Page 32: Figure 13 Connecting The Supply Line To The Terminal Block - 1-Phase Connection
Operating Instructions SMARTFOX Pro Charger INFORMATION Single-phase connection Each charging station can and may also be connected single-phase. For this purpose, the terminals for L2 and L3 are left free - see (12). The screws of the free terminals must nevertheless be tightened. The DIP switches on the charge controller must be set according to the back-up fuse (see chapter Fehler! Verweisquelle konnte nicht gefunden werden.). -
Page 33: Figure 14 Checking The Correct Routing Of The Connection Cable - Correct
Operating Instructions SMARTFOX Pro Charger 11. Check that the connection cable is laid correctly. The connection cable must not run or be laid above the terminal block. This applies to the supply line from behind as well as from below. -
Page 34: Figure 16 Checking The Cable Glands
Operating Instructions SMARTFOX Pro Charger 12. Check the cable gland of the supply line as well as the RS485 line from below for correct seating. Ensure that the installation is tight and correct. In the case of a supply line from behind, check the step nipple for correct seating to prevent water from entering. -
Page 35: Figure 18 Connecting The Connection Cable (Led Board)
Operating Instructions SMARTFOX Pro Charger 14. Cable variant: Opposite to point 7. connect the connection cable of the LED board again in this step. Figure 18 Connecting the connection cable (LED board) P a g e 35 | 92... -
Page 36: Figure 19 Cover Assembly
Operating Instructions SMARTFOX Pro Charger 15. Finally, screw all 8 stainless steel screws of the cover into the openings provided. Make sure that the screws are evenly distributed when screwing them on, whereby a maximum tightening torque of 3 Nm should not be exceeded. -
Page 37: Installation Guidelines
Operating Instructions SMARTFOX Pro Charger 4.6 Installation guidelines • Observe the locally applicable electrical installation regulations, fire prevention measures and accident prevention regulations. • The charging station must not be installed in potentially explosive zones (EX environment). • Mount the charging station in such a way that it is not in the direct flow of people and that no one can trip over the plugged-in or permanently mounted charging cable or that the charging cable does not occupy or cross any pavements. -
Page 38: Commissioning
Operating Instructions SMARTFOX Pro Charger 4.7 Commissioning The commissioning of the product at the customer's site is carried out by qualified personnel from DAfi GmbH or an electrotechnical specialist. All applicable standards and laws must be observed. 4.8 Operator-side Handover After commissioning of the product, the handover to the customer takes place. -
Page 39: Recommended Backup Fuse
Operating Instructions SMARTFOX Pro Charger 5 Recommended Backup fuse Depending on the design, the charging station must be appropriately pre-protected. For this purpose, separate line and residual current circuit breakers can be used as well as a combined circuit breaker, which takes over both tasks of the protective functions in one device. -
Page 40: Operating Mode & Charging Current Limit
Maximum permissible charging current: 13 A Default setting "SMARTFOX Bus mode". Operating mode SMARTFOX bus operation for RS485 Modbus RTU - inputs E1 and E3 are ignored (default setting) Maximum permissible charging current: 16 A SMARTFOX bus operation for RS485 Modbus RTU - inputs E1 and E3 are... -
Page 41: Wiring Diagram With Sf Pro
Operating Instructions SMARTFOX Pro Charger 7 Wiring diagram with SF Pro 7.1 Connection of a charging station P a g e 41 | 9 2... -
Page 42: Connection Of Several Charging Stations (Max. 5)
Operating Instructions SMARTFOX Pro Charger 7.2 Connection of several charging stations (max. 5) P a g e 42 | 92... -
Page 43: Second Control Level (Smartfox Energy Meter) Several Charging Stations
Operating Instructions SMARTFOX Pro Charger 7.3 Second control level (SMARTFOX Energy Meter) several charging stations P a g e 43 | 9 2... -
Page 44: Connection Manual Switch (Optional)
"Manual mode" (forced charging). If the switch is open, the status "On- site switch active" is output on the SMARTFOX. The charging mode can no longer be changed via the web interface until the switch is closed again. -
Page 45: Control Via Smartfox Pro Energy Management
In order to be able to use the full range of functions of the charging station, it can be connected to the SMARTFOX Pro energy management system. This enables surplus-optimised charging, dynamic load management, remote control via APP and many other functions. - Page 46 Operating Instructions SMARTFOX Pro Charger c) Complete the registration data: d) You will receive an email with the registration link. Confirm this. The login to my.smartfox.at is now available. P a g e 46 | 92...
-
Page 47: Add Smartfox Pro
The designation of the unit can be freely selected c) Enter the 12-digit MAC address of the SMARTFOX Pro. The MAC address can be read on the type plate (unit, packaging), in the main display menu of the unit or copied from the local web server (http://dafi-smartfox). - Page 48 801F5Z78841B EM2 00.01.03.0 0 72.68.42.8 1 1 h) If the plug symbol is green and connected, the SMARTFOX can be accessed via the web portal and parameterisation can be started. If the plug symbol remains red and disconnected, restart the SMARTFOX or check the network connection and network settings.
-
Page 49: Software / Software Update
To do this, hold the outer two buttons (arrow up + arrow right) simultaneously for approx. 10s. Press and hold the outer two buttons simultaneously for approx. 10 seconds. c) Further options and details on software updates can be found in the SMARTFOX Pro operating instructions or at www.smartfox.at/downloads. P a g e 49 | 92... -
Page 50: Add Licence / Serial Number
Enter the serial number (see type plate on charging station / packaging) of the SMARTFOX Pro Charger. c) Click on "Save". Up to 5 SMARTFOX Pro Chargers can be added. After activating a charging station, the next input field appears. P a g e 50 | 92... -
Page 51: Parameterisation Smartfox Pro
SMARTFOX Pro Charger 8.6 Parameterisation SMARTFOX Pro The following steps show the parameterisation via the web portal my.smartfox.at, all settings can also be carried out directly on the device or via the IP address (local) or the WIFI access point of the SMARTFOX. - Page 52 Operating Instructions SMARTFOX Pro Charger d) The pop-up window opens e) Select "SMARTFOX Pro Charger" in the drop-down menu. P a g e 52 | 92...
- Page 53 Operating Instructions SMARTFOX Pro Charger f) The commissioning wizard is called up. g) Click on "Start configuration h) Make sure that only the charger to be configured is switched on! Click on "Configure P a g e 53 | 92...
- Page 54 The system starts the configuration. k) If the LEDs on the charger flash alternately blue / green, the configuration was successful. Click on "Done After configuration, "SMARTFOX devices" should automatically appear in the menu under RS485/CAN. Adjust the settings if necessary. SMARTFOX devices...
-
Page 55: Further Parameterisation
Operating Instructions SMARTFOX Pro Charger 8.7 Further Parameterisation a) If the configuration was successful, further parameterisation can be started. b) Assign a name with which the charging station is to be displayed in the overview. e.g. Garage c) Assign colour with which the charging curve is displayed in the charts (power, energy...) d) Enter the maximum charging current of the charging point (charging station fuse) in amperes. - Page 56 Operating Instructions SMARTFOX Pro Charger The charging station is displayed in the overview. k) At the bottom right you can see the connection status of the respective charging station. Green tick: Communication successful Red X: Communication error Under "Regulation", the fine setup of the charging stations can be carried out.
- Page 57 If a forced charge is carried out and further consumers (e.g. electric cooker) are switched on in the house and thus the limit of the house connection fuse is reached, SMARTFOX Pro dynamically regulates the charging station back.
- Page 58 Operating Instructions SMARTFOX Pro Charger q) Switch-off delay: If the surplus collapses for a short time during the charging process (e.g. in clouds), the selected time of the "switch-off delay" is waited for before the charging is terminated. This allows short periods of draw during charging to be bridged. A delay of 0 - 255 minutes can be set.
-
Page 59: Live Overview
Operating Instructions SMARTFOX Pro Charger 8.8 Live overview a) The parameterised charging station is displayed in the overview with the assigned name. b) The mini LEDs in the upper left area of the tile visualise the activity of the consumer. - Page 60 Operating Instructions SMARTFOX Pro Charger Clicking on the symbol opens the pop-up window for selecting the charging mode: g) Modes Mode OFF (Switched off) The charging station is locked and does not release a charge. Mode M (forced charging): The vehicle is charged with the highest possible charging power (electricity can be drawn from the grid).
-
Page 61: Parameterisation Of The Weekly Timer
Operating Instructions SMARTFOX Pro Charger 8.9 Parameterisation Weekly timer In the following section, the parameterisation of the integrated weekly time switch is explained using two examples (1. ready to leave on weekdays; 2. outside opening hours). Up to 3 different switching times can be stored at each output. - Page 62 Operating Instructions SMARTFOX Pro Charger d) Open one of the three switching times by clicking. e) e.g. open switching time 1 by clicking on the plus symbol f) Days: Activate desired weekdays of the switching time g) Select start time of forced release e.g. 00:00 h) Set end time of release e.g.
-
Page 63: Figure 24 Control A+ Automatic & A+ Manual
Operating Instructions SMARTFOX Pro Charger Figure 25 Control A+ automatic & A+ manual P a g e 63 | 92... -
Page 64: Example: Integration Of Switching Times "Outside Opening Hours
Operating Instructions SMARTFOX Pro Charger 8.9.2 Example: Integration of switching times "outside the opening hours": If charging stations are installed in semi-public areas, there may be a requirement to enable charging points only during opening hours. The example shows the parameterisation of the switching time mode "locked". - Page 65 Operating Instructions SMARTFOX Pro Charger g) Select timer 2 h) Select weekdays (Mon, Tue, Wed, Thu, Fri) Select start time 00:00 Select end time 08:00, shop opens. k) Mode -Select "Locked" switching time Confirm with OK m) Select timer 3 (weekend lock)
-
Page 66: Automatic 1-Phase / 3-Phase Changeover
= approx. 4.3kW). In order to be able to charge with a pure surplus even when the energy yield of the PV system is low (e.g. bad weather), SMARTFOX Pro automatically selects the best operating point. If there is little energy, 1-phase charging can be started from as little as 1.3kW. If the surplus energy increases, the SMARTFOX Pro automatically switches to 3-phase charging and can now continuously control up to 11kW. -
Page 67: Charge Stop Function (Evu Lock)
This function can be realised via the S0 input of the SMARTFOX Pro. Connection The two wires of the control signal are connected to the S0+ & S0- input of the SMARTFOX. The polarity is irrelevant here. If the normally open contact of the ripple control receiver is actuated, the signal on the SMARTFOX is switched through and the charging stations are blocked. -
Page 68: Control Of Several Charging Stations
8.1.5 to 8.1.10. The dynamic load management of the SMARTFOX Pro enables stepless excess charging of up to 5 charging points, as well as dynamic power limitation in order not to overload the house connection fuse or exceed the peak power available from the grid operator. - Page 69 Operating Instructions SMARTFOX Pro Charger Priorities can be assigned for charging points 1 to 5. Multiple charging stations: 1= highest priority ... 5= lowest priority. Charging stations with the same priority are controlled in parallel. a) Select the charging station to be parameterised.
- Page 70 (e.g. electric cooker, heat pump...). SMARTFOX recognises the additional consumption and regulates the charging stations back according to the set priorities. This means that several charging stations can also be operated on one connection with little available peak load without any problems (e.g.
- Page 71 In this way, for example, the house connection point and the outlet to the underground car park can be monitored. With the use of the SMARTFOX Energy Meter, outlets up to 80A can be monitored. Example 3a) and 3b) from page 76 shows the single phase monitoring incl.
- Page 72 Operating Instructions SMARTFOX Pro Charger e) Open the "Charging station" submenu f) Set power limitation sub-counter to "current" or "power g) Enter the limit of the sub-counter in amperes or kilowatts. h) Select responsible sub-counter P a g e 72 | 92...
- Page 73 Operating Instructions SMARTFOX Pro Charger Example J Control parallel Max. House connection power: approx. S4kW charging points: Priority charging stations manual mode, maximum house connection power 54kW set up SMARTFOX chargers in parallel. house consumption increases e.g. 4kW, SMARTFOX Pro readjusts...
- Page 74 Operating Instructions SMARTFOX Pro Charger P a g e 74 | 92...
- Page 75 Operating Instructions SMARTFOX Pro Charger P a g e 75 | 92...
-
Page 77: Operation
Operating Instructions SMARTFOX Pro Charger 9 Operation After installation and initial commissioning, the SMARTFOX Pro Charger is ready to charge your vehicle. 9.1 Charging cable Figure 26 Charging cable Description Charging cable Pin: Remove the charging cable (1) from the holder. To do this, lift the plug of the charging cable at the front and then pull it out of the holder. -
Page 78: Display Elements
Operating Instructions SMARTFOX Pro Charger Staking: To end the charging process or after the charging process has ended automatically, disconnect the charging cable from the vehicle. It may be necessary to unlock the vehicle again or press a separate release button (if necessary, please refer to the vehicle operating instructions). The charging cable can then be hooked back into the holder. - Page 79 Operating Instructions SMARTFOX Pro Charger Charging in progress When the vehicle is plugged into the charging station, the colour of the LEDs changes from green to blue. A clear, single switching is heard in the wallbox and the charging process begins.
-
Page 80: Energy Meter
SMARTFOX Pro Charger Communication error (RS485) If there is no connection to the SMARTFOX Pro Energy Manager for more than one minute, the display flashes violet and thus visualises a communication error. To rectify the error, try restarting the system or check the RS485 line and parameterisation. -
Page 81: Maintenance
Operating Instructions SMARTFOX Pro Charger 10 Maintenance The activities required for maintenance are explained in the following chapters: Inspection, cleaning, maintenance, spare parts management and repair. NOTE General notes • The following information must be observed; in addition, the instructions in the respective original manufacturer's documentation must not be disregarded. -
Page 82: Cleaning
Operating Instructions SMARTFOX Pro Charger 10.2 Cleaning The following points must be observed when cleaning the product: • The product must be disconnected from the power supply before cleaning. Cleaning work may be carried out by laypersons who have read and understood the •... -
Page 83: Spare And Wear Parts
During repair work on the product, additional danger points could be accessible. • Repair work may be carried out exclusively by DAfi GmbH or certified SMARTFOX partners. These persons must also have read and understood this documentation. P a g e 83 | 92... -
Page 84: Periodic Inspection
This includes all shutdown conditions including the back-up fuse according to the data sheet or initial commissioning protocol. In addition, annual maintenance by DAfi GmbH or certified SMARTFOX partners is recommended. 10.7 Decommissioning To take the product out of operation for a short period of time, the following steps must be carried out in compliance with the safety instructions in chapter 3.4:... -
Page 85: Disposal
Operating Instructions SMARTFOX Pro Charger The following points must be observed when dismantling the product: • After decommissioning (see chapter 10.7), the charging station must be disconnected from the power supply. Transport may only be carried out in compliance with the transport regulations. -
Page 86: Appendix
Operating Instructions SMARTFOX Pro Charger 11 Appendix 11.1 Drawings - Drilling template (unit: mm) The drilling template is located on the inside of the box (see illustration below). Figure 27 Drilling template & cardboard (bottom part) P a g e 86 | 92... -
Page 87: Spare And Wear Parts
Operating Instructions SMARTFOX Pro Charger 11.2 Spare parts and Wear parts Designation Bushing incl. sealing ring Actuator cable Box cover incl. sealing ring Housing upper part Housing lower part Type2 plug holder Contactor, 11 kW SMARTFOX Energy Meter Power supply unit 12 V, 15 W... -
Page 88: Packaging Icons
Operating Instructions SMARTFOX Pro Charger 11.4 Packaging icons ICON / Symbol Description ICON / Symbol Description The charging station was Optimal use of your manufactured in Austria photovoltaic energy The charging station is Top price-performance ratio weather resistant With SMARTFOX Pro... -
Page 89: Eu Declaration Of Conformity
Operating Instructions SMARTFOX Pro Charger 11.5 EU Declaration of Conformity P a g e 89 | 92... -
Page 90: Notes
Operating Instructions SMARTFOX Pro Charger 11.6 Notes ................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................P a g e 90 | 92... - Page 91 Operating Instructions SMARTFOX Pro Charger ................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................P a g e 91 | 92...
- Page 92 DAfi Ltd. Niedernfritzerstr. 120, 5531 Eben im Pg., AUSTRIA Tel.: +43 (0)6458 20160 Mail: office@smartfox.at UID: ATU67186948 FN379380m Instagram (Smartfox_energy_management) Facebook (Smartfox - Energy Management System) SMARTFOX Energy Management YouTube (Smartfox - Energy Management) P a g e 92 | 92...
Need help?
Do you have a question about the SMARTFiciX Pro Charger and is the answer not in the manual?
Questions and answers