Quick-start Restore defaults Scan the “Restore Custom defaults”. Restore Custom defaults Write to Custom Defaults Quick-start : 2.4G/433M The factory has been matched and you can use it directly. Matching Operation: 1, Press the button, the buzzer rang “Di-di-di” , the blue light is on, the scanner starts. Note: In the 2.4g mode of the Bluetooth scanner , the light is green.
If you have 3 scanners: scanner A, scanner B, scanner C. 1, Plug the dongle to your computer. 2, Match for the scanner A: A scan the “Match” Barcode. 3, Unplug the dongle and Plug the dongle again. 4, Match for the scanner B: B scan the “Match” Barcode. 5, Unplug the dongle and Plug the dongle again.
HID-speed 40 HID-speed 50 HID-speed 60 1, In 2.4G or 433M mode, this parameter is stored in the dongle and defaults is "No delay". When there is no matching dongle, scanning this setting code is invalid. 2, In Bluetooth mode, this parameter is stored in the scanner, the default is "HID-speed 30". 3, In Bluetooth mode, If the data is lost, please set a slower HID speed.
2, The scanner starts, when the buzzer rang “Di-di-di” and the blue light is on with the red light flashes three times, it indicates that the battery less than 20%, please charge the scanner as soon as possible. 3, The scanner starts, when the buzzer rang “Di-di-di” and the blue light is on with the red light flashes three times, it indicates that the battery less than 5%, The scanner enters the low battery protection mode.
Setup code sound-ON* Setup code sound-OFF* End character End character is used to mark the end of a barcode data. CR * CR+LF None Capital & Lowercase Swap capital/lowercase All lowercase All capital Don't convert * Barcode Reading function ID, ON/OFF, Min-digits Barcode-ID: The scanner defines ID characters for each type of barcode, we can use the Code ID prefix to identify the barcode type.
Duplicate detection-OFF* Duplicate detection-ON (upload duplicate barcode) (Unable to upload duplicate barcode) Duplicate detection 1 S Duplicate detection 5 S Duplicate detection 10 S Duplicate detection 25 S For example:Set the “Duplicate detection 5 S”. After scanning A bar code, the scanning A bar code will not be uploaded within 5 seconds, and it will be handled as upload failure, Scan other barcodes and then scan A barcode to upload.
Data editing Relevant setting barcode Insert Characters Delete characters Barcode types(Barcode data: 068000-068018) All barcode types UPC&EAN Code39 Coda bar Code128 Code93 Interleaved 2 of 5 Code11 GS1-Databar PDF417 Data Matrix Aztec Code Maxi Code Do not scan = All barcode types. Set save location (Barcode data: 068100-068107) (Different group Settings can take effect at the same time) Group 1...
Example: Insert character In the process of setting, scan the irrelevant barcode, the scanner will exit setting status. Please scan in order 1,2,3, … Example: Code128=123456789 Insert Ab before Insert Cd from the third Insert Ef after Insert Characters All barcode types (Omit this step, default all barcode types)...
Save Settings Setup result 23456789 1236789 123456 Clear delete character setting, Please scan in order 1,2. 1, Delete characters 2, Clear settings 1, set different bar code type, make this setting to this kind of bar code is effective. 2, set different group, make different Settings take effect at the same time. Quick delete character Delete 1 bit before Delete 1 bit after...
Page 66
Output time Set Year Month Day Set Hour Minute Second Save settings Examples step Set Y.M.D-20.06.10 step Set H:M:S-16:34:30 Set Year Month Day Set Hour Minute Second NUL/SP NUL/SP NUL/SP NUL/SP Save settings Save settings Date format default:2020.06.10 American:06.10.2020 British:10.06.2020 Date delimiter character “.”-default Date delimiter character “/”...
Time output and examples Time-prefix/suffix Time-prefix/suffix -OFF* Time-prefix Time-suffix Insert time by data editing Replace time with a key combination(NUL+SOH) NUL+SOH=Time-OFF NUL+SOH=Time- ON* Example-Insert Time In the process of setting, scan the irrelevant barcode, the scanner will exit setting status. Example: Code128=123456789 Before barcode From the third...
LED description 1, Wired scanner: Green light. Green:Always on when working, Turn off when reading. 2, 2.4G wireless scanner: Blue + Red light. Blue:Always on when working, Turn off when reading. Red:Low power indicator, charging breathing light. 3, 433M wireless scanner: Blue + Red light. Blue:Always on when working, Turn off when reading.
1, In wired mode, there is no data upload? ① Scanner is set to storage mode? Please set to instant upload mode. ② Scanner is set to USB-COM? Please set to USB-HID. 2, 2.4G/433M connected but no data upload? ① Scanner is set to storage mode? Unplug and plug the dongle,Scan setting code: "Match"...
Page 72
Description Description Home Keypad end Keypad Page Up Keypad Page Down Keypad Left shift make Up Arrow Keypad Left shift break Down Arrow Keypad Right shift mark Left Arrow Keypad Right shift break Right Arrow Keypad Left ALT mark Center Keypad Left ALT break Insert Right ALT mark...
r_Ctrl on r_Ctrl off /(KP) *(KP) -(KP) +(KP) _(KP) Enter(KP) 0(KP) 1(KP) 2(KP) 3(KP) 4(KP) 5(KP) 6(KP) 7(KP) 8(KP) 9(KP) Inert Delete Home Page Up Page Down Down Left Right Center Insert Delete Home Page Up Page Down Down Left Right Num Lock caps lock...
Page 77
BELGIUM GERMANY SLOVENIA BRAZIL HUNGARY SPAIN CANADIAN-FRENCH ITALY SWEDEN CROATIA LATIN AMERICA SWITZERLAND (FRENCH) CZECHOSLOVAKIA (CZECH) NETHERLANDS SWITZERLAND (GERMAN) CZECHOSLOVAKIA (SLOVAK) NORWAY UNITED KINGDOM DENMARK POLAND UNIVERSAL FINLAND PORTUGAL...
Page 78
Manufacturer: EC LINE Thank you very much for using EC Line product For service, please contact service@ecline.com.hk www.eclinepos.com...