Control Panel; Operation - Buffalo CU558 Instruction Manual

Control panel

Thermostat
• Before using the appliance, ensure all thermostats are at the "0" position.
• During operation, take care of your rings, watches and similar objects as they may become hot.

Operation

1. Place suitable cookware on to the centre of the desired cooking zone.
2. Switch the appliance on at the power supply.
3. Set the thermostat to desired power setting. The appliance will start to work and the operating
indicator light will light up Green.
Rear hobs:
Level 1
Power (W) 300
Front hobs:
Level 1
Power (W) 300
Please note, when both the rear and front zones are switched on and total power is up to
3000W; the rear zone will draw the correct power required and any remaining power will
be sent to the weaker front zone.
4. To turn appliance off, just set the thermostat to "0".
Boost function
For faster cooking, set the thermostat to "B". The rear zones will work at 3000W while front zones will
stop working automatically.
Operating indicator light mode
When power level "1-11/B" is
set and a pan is detected
When power level "1-11/B" is
set but no pan is detected
When power level 0 is set
CU558_ML_A5_v1_20230918.indb 5 CU558_ML_A5_v1_20230918.indb 5
Operating indicator light
2 3 4 5
450 600 750 900
2 3 4 5
450 600 750 900
Lighting up Green
Flashing red for up to 60 seconds, during which if a pan is
replaced, the appliance will stay On. Otherwise, it will switch off.
To re-use the appliance, turn the thermostat to "0" then set the
desired power level.
No light on
6 7 8 9
1050 1350 1650 1900
6 7 8 9
1050 1200 1350 1500
EN
10 B
2000 3000
10 11
1650 1800
5
2023/9/18 11:39 2023/9/18 11:39