Do you have a question about the RX42-608 and is the answer not in the manual?
Questions and answers
Summary of Contents for EUROLAMP RX42-608
Page 1
ΟΔΗΓΙΕΣ ΧΡΗΣΗΣ INSTRUCTIONS 300-25019 (RX42-608) ΑΝΕΜΙΣΤΗΡΑΣ ΟΡΟΦΗΣ ΛΕΥΚΟΣ ΜΕ ΑΝΟΙΓΟΚΛΕΙΟΜΕΝΕΣ ΦΤΕΡΩΤΕΣ ΗΧΕΙΟ BLUETOOTH,LED ΦΩΣ ΚΑΙ ΚΟΝΤΡΟΛ 40W DC MOTEΡ DECORATIVE FAN WHITE WITH RETRACTABLE BLADES BLUETOOTH SPEAKER,LED LIGHT AND REMOTE CONTROL 40W DC MOTOR 220-240V/ 40W / Φ107...
Page 2
την παροχή ρεύματος. Μην ενεργοποιήσετε την παροχή ρεύματος έως ότου εγκατασταθεί πλήρως ο ανεμιστήρας και είναι έτοιμος για χρήση. Η EUROLAMP ΑΒΕΕ διατηρεί το δικαίωμα να ερμηνεύει και να τροποποιεί το περιεχόμενο αυτού του εγγράφου ανά πάσα στιγμή χωρίς προηγούμενη ειδοποίηση.
Page 3
CAUTION: Before installing the fan, be sure to turn off the power supply. Do not turn on power until the fan is fully installed and ready for use. EUROLAMP SA reserves the right to interpret and amendment the content of this docu- ment at any time without prior notice.
Page 4
Σύνδεση με το Bluetooth ηχείο 1. Ανοίγετε την εφαρμογή Bluetooth στο κινητό σας 2. Κάνετε εύρεση της συσκευής και συνδεθείτε με τον ανεμιστήρα με ονομασία Speaker light 3. Καλή διασκέδαση ΠΡΟΣΟΧΗ 1.Η ισχύς εισόδου για αυτόν τον ανεμιστήρα πρέπει να είναι 220V/50HZ. 2.Η...
Page 5
Βήματα και οδηγίες εγκατάστασης 1.Λίστα εξαρτημάτων 2. Εγκατάσταση βάσης στήριξης (1). Οροφή από σκυρόδεμα: Ανοίξτε δύο τρύπες με κατάλληλο βάθος με ένα τρυπάνι με διάμετρο στα 8 mm και τοποθετήστε τις δύο βίδες στις οπές. Στη συνέχεια στερεώστε την βάση στήριξης στις...
Page 6
3. Εγκατάσταση βάσης-πλακέτας LED Χαλαρώστε τις βίδες από το κάτω μέρος του σώματος του ανεμιστήρα και αφαιρέστε τη μία , κρατηστε την για χρήση αργότερα. Συνδέστε το κιτ φωτιστικών στο σώμα του ανεμιστήρα , περιστρέφοντας το κιτ φωτός μέχρι να εφαρμόσει στις τρεις χαλαρωμένες βίδες στο σώμα του...
Page 7
5.Εγκατάσταση σκίαστρου (1).Βεβαιωθείτε ότι η υποδοχή του σκίαστρου είναι στην ίδια ευθεία με την υποδοχή στο σώμα του ανεμιστήρα και στη συνέχεια, περιστρέψτε ελαφρά το σκίαστρο δεξιόστροφα μέχρι να κουμπώσει. (Fig. 10 & 11) 6.Ρύθμιση ισορροπίας του ανεμιστήρα Κατα την μεταφορά επιρρεάζεται η ισορροπία του ανεμιστήρα.Επομένως, ισορροπήστε ξανά τον...
Connect to the Bluetooth speaker 1. Open the Bluetooth application on your mobile phone 2. Find the device and connect to the fan named Speaker light 3. Have fun Warning 1.The input wattage for this fan should be 220V/50HZ. 2.Electrical installation should be performed by a qualified licensed electrician. 3.To reduce the risk of electric shock, ensure electricity has been turned off before as- sembling or disassembling.
Installation steps and instructions 1.Components list 2.Mounting bracket installation (1). Concrete ceiling: Drill two holes with an appropriate depth by a drilling bit with dia. At 8mm, and insert two pieces expansion screws in the holes, then fix the hanger bracket into the ex- panding screws with the wood screws and tighten it by the nuts of the expansion screws.(Fig.2) (2).Wood ceiling: Fix the mounting bracket to the wood ceiling with (thickness at 7cm at least) by 4 wood screws.
Page 10
3.LED Light installation Loose the four screws from the bottom of the fan body, and remove one screw put on side for use later. Attached the light kit to the fan body by rotating the light kit until it seat into the three loosened screws on the fan body, then tighten the screws, also screw in the removed screw and tighten it.
Page 11
5. Attach the glass (1).Make sure the key slot on the light glass is in the same line with the key slot on the fan body, then rotate the glass clockwise slightly until the glass is firmed. (Fig. 10 & 11) 6.Balance adjustment for this ''invisible'' fan Affect during the long distance transportation.
Page 12
ΕΙΣΑΓΕΤΑΙ ΣΤΗΝ Ε.Ε. ΑΠΟ ΤΗΝ EUROLAMP ΑΒΕΕ: ΚΑΜΠΟΣ ΔΙΑΒΑΤΩΝ – ΙΩΝΙΑ 570 08, ΘΕΣΣΑΛΟΝΙΚΗ T: 2310 574802 ΚΑΤΑΣΚΕΥΑΖΕΤΑΙ ΣΤΗΝ ΚΙΝΑ IMPORTED IN ΕU BY EUROLAMP SA: KAMPOS DIAVATA - IONIA 570 08,THESSALONIKI - GREECE T: +30 2310 574802 MADE IN CHINA info@eurolamp.gr...
Need help?
Do you have a question about the RX42-608 and is the answer not in the manual?
Questions and answers