Advertisement
Advertisement
Table of Contents
Summary of Contents for Ofs Boone
- Page 1 Boone assembly instructions...
- Page 2 Boone assembly instructions Table of contents Safety information Clamp on mount installation Surface mount installation Assembly instructions ofs.com imagine a place® 800.521.5381...
- Page 3 Boone assembly instructions Important safety instructions When using an electrical furnishing, basic precautions should always be followed, including the following: This furnishing is made for commercial use only. Read all instructions before using this furnishing: DANGER To reduce the risk of electrical shock: 1.
- Page 4 Boone assembly instructions Clamp on power Components: Power unit 2x Thumb screws Assembly: Slide unit mount onto edge of surface. (Figure A) Tighten thumb screws on underside of the surface. (Figure B) Plug in the unit. Thumb screws Figure A...
- Page 5 Boone assembly instructions Undersurface mount power Components: Power unit Mounting 3x T#10 Plastic bracket Wood screw thumb nut Tools required: Phillips screwdriver Pilot drill bit (optional) Assembly: With two of the provided screws, attach the mounting bracket to the underside of the surface in the location desired, utilizing the two slotted holes.
- Page 6 Boone assembly instructions Undersurface mount power continued Feed unit through the mounting bracket making sure to pass the threaded stud through the hole in the back of the bracket. (Figure B) Fix the unit with the provided thumb nut. (Figure C)
Need help?
Do you have a question about the Boone and is the answer not in the manual?
Questions and answers