Download Print this page

PENN-PLAX DOGGR7 Product Manual

Pet grooming dryer

Advertisement

Quick Links

PET GROOMING DRYER
COMPONENTS:
Stainless Steel Slicker Brush
Air outlet
Brush head release buttons
Debris release button
Air Intake filter
SR wire clamp
Power Cord
SPECIFICATIONS:
Input: AC100~120V
Power: 300W
Frequency: 50Hz
Cable length: 2m
WARNING:
Pet parents understand the temperament and behavior of their animal best. The use of
this grooming tool is at your own risk.
Children are prohibited from using or cleaning grooming dryer appliance.
This grooming dryer is intended for pet hair grooming purposes only. Not for use on
humans.
Keep away from water. Use caution when using tool when in close proximity to water.
Water entering a power tool will increase the risk of electric shock.
To reduce the risk of electrical shock, do not put cord or charging base in water or other
liquid. Do not place or store appliance where it can fall or be pulled into a tub or sink.
Keep cord away from heated surfaces.
Appliance has 3 Air/Heat settings:
1. Off / Cool
2. Low Heat/Speed (122°F / 50°C)
3. High heat/Speed (140°F / 60°C)
Adjust the airflow according to your need. The airflow temperatures may vary under
different environment temperature.
©2020 Penn-Plax, Inc.
Stainless steel
slicker
One-click
hair removal
Air outlet
Replace comb
button
3 Temperature
adjustment
Air intake
SR wire clamp
ATTENTION:
Read this manual carefully before you use the appliance and keep it for future reference.
1. Before you connect the appliance ensure that the voltage indicated on the appliance
corresponds to the local power voltage.
2. Do not use this appliance near bathtubs, showers, basins or other vessels containing water.
3. Do not use the appliance under damp conditions. Keep it in a dry place.
4. Always make sure your appliance is not wet (water splashes) and never handle it with
wet hands.
5. Never move the appliance by pulling the cord. Do not wind the cord around the
appliance and do not bend it.
6. Do not keep drying in the same area to avoid scalding injury.
7. Make sure the hair does not come into direct contact with the air intake opening.
8. The dust filter in the air intake opening prevents the hair from being sucked in. Without
proper cleaning, the airflow will decrease progressively and the appliance may get damaged.
9. The appliance has auto power shut-off function. If the temperature is too high, the safety
monitor inside will stop the appliance immediately. The appliance will restart after it cools
down in a few minutes.
10. Check the cord for damages. Never use the appliance if cord or any part shows any signs
of damage. If the cord is damaged, it must be replaced by a qualified electrician.
11. Before cleaning, always unplug the appliance.
12. Children are prohibited from using the appliance.
13. Do not use this appliance near corrosive or explosive gas and other hazardous
environments.
14. This appliance cannot be used as a medical or industrial device.
15. Please unplug the power immediately if the appliance is not working properly.
16. For indoor use only. Keep it in a cool dry place free of dust.
17. Warning – Please keep the appliance dry.
Do not use this appliance near bathtubs, showers or other vessels containing water.
Please do not use it for any purpose other than described in this manual.
USING THIS PRODUCT:
First, dry off your pet with a dry towel. This will shorten the drying time significantly and
improve the grooming speed.
To make sure your animal is comfortable, first try product without power. If you see any
signs of distress, stop use.
(continued on next page)
©2020 Penn-Plax, Inc.

Advertisement

loading

Summary of Contents for PENN-PLAX DOGGR7

  • Page 1 To make sure your animal is comfortable, first try product without power. If you see any Adjust the airflow according to your need. The airflow temperatures may vary under signs of distress, stop use. different environment temperature. (continued on next page) ©2020 Penn-Plax, Inc. ©2020 Penn-Plax, Inc.
  • Page 2 MADE IN CHINA PROBLEMS OR QUESTIONS? Email us at consumerservice@pennplax.com, visit us at www.penn-plax.com/customerservice or call 866-625-2385 (US & Canada Only) © 2020 PENN-PLAX, INC., 35 MARCUS BLVD., HAUPPAUGE, NY 11788 USA PRINTED IN CHINA 2008-GC DOGGR7-INSTRUCTIONS.ai...