Equipment And Description; For The User Safety Instructions - AEG VITRAMIC 725K Instructions For Installation And Use Manual

Build-in hotplate unit
Table of Contents

Advertisement

Equipment and description
(gb)
A Dual circuit hotplate 12 cm and 21 cm 0
with corresponding switch
B Roaster plate 14.5 cm x 25 cm with
corresponding switch
C Hotplate 18 cm 0 with corresponding switch
D Hotplate 14.5 cm 0 with corresponding
switch
E Touch control for dual zone
F Touch control for roaster plate
G Residual heat indicator
For the user
Safety instructions
To comply with safety regulations we must draw your attention
to the following instructions:
■ Only an approved electrical installer should
connect your appliance. This ensures that
the legal requirements and the connection
regulations of your electricity supply author¬
ity applicable in your locality are complied
■ To maintain the safety of your appliance
you should only have repairs, especially on
live parts, carried out by a trained electri¬
cian. In the event of a fault, you should
therefore approach your retailer or our
AEG Service Department direct.
■ During cooking, the hotplates become hot.
You should therefore keep small children
well away.
■ Overheated fats and oils rapidly ignite on
hot hobs! Preparation of dishes with fats
and oils (eg chipped potatoes) must always
be supervised.
■ Please make sure that the connection leads
of other appliances (eg small appliances)
do not come into contact with the hot
hotplates.
Important
Never use this appliance for heating purposes!
This appliance must never be operated
without supervision!

Advertisement

Table of Contents
loading

Table of Contents