Advertisement
DISC PLAYING
1. Open the CD door by pressing the OPEN button.
2. Place a CD with the label side facing upwards onto the centre spindle, gently push down until
the disc clicks in place.
3. Press the top of the CD lid to close.
ON DISPLAY WINDOWS
If a CD is loaded, when you press "
" button, the display window shows:
Total number of tracks
DURING PLAYING
The track number of the current selection appears.
When "
" is pressed during play, total number of tracks on the disc will be displayed and the unit
will stop playing.
If "
" is pressed again the unit will be returned to full stop mode. If "
returns to play mode.
Note: When the STOP button has been pressed once during play, if another button is not pressed
within 30 seconds, then the unit will be placed in full stop mode.
DURING PAUSE
The playing track number will flash.
When no disc is inserted and "
" button is pressed, "
The unit cannot be operated when error message is displayed. After approx. 30 seconds the unit
will return to full stop mode. Reset the player by pressing "
playing.
VARIOUS PLAYING MODES
During playback, every time the " PLAY MODE " button is pressed, the playing mode will be
changed as follows:
IN NORMAL PLAYING MODE:
NORMAL PLAY -> (
) REPEAT ONE -> (
) REPEAT ALL -> INTRO -> SHUFFLE
NORMAL PLAY-- Playing the whole disc
The CD is played once from the beginning to the end.
REPEAT PLAYBACK-- Repeat One and Repeat All
•
To repeat single track
Press " PLAY MODE " button during play until "
display. The selected track will be played repeatedly.
To select another track, press "
"or "
" button.
•
To repeat whole disc
Press " PLAY MODE " button during play until "
display.
The whole disc will be played repeatedly.
INTRO PLAY-- Playing the first ten seconds of all the tracks
1. Press " PLAY MODE " button during play until " INTRO " flashes in the
display.
2. Press "
" button to begin " INTRO " play.
Each track will be played about ten seconds.
3. Pressing "
" button again will cease intro play and continue to normal
playback.
NOTE: Intro play always starts from the first track.
SHUFFLE PLAY--playing the tracks in random order
1. Press " PLAY MODE " button during play until " SHUFF " flashes
in the display.
2. Press " PLAY/PAUSE " button to begin the shuffle play.
•
To locate the next track, press "
NOTE: You cannot locate the previous track even you keep the "
pressed.
PROGRAM PLAY--playing the tracks in the desired order
1. Press " PROGRAM " button until " PROG " and " 01 " flash in the
display.
Begin to play the first track
2. Press "
3. Press " PROGRAM " button to register track no. 6, for example,
as the first selection. The program number indication will be
" is pressed the unit
changed to the next one, for example: "02 ".
4. Repeat steps 2 to 3, until all the desired tracks are programmed
(up to 24 tracks).
5. Press "
" button, and program playing begins.
NOTES:
•
Repeat play and intro play can be performed during program play. But shuffle play is inactive.
Pause mode of the 1st track
•
The program is erased, when:
1. The disc compartment is opened or the auto power off function turns the power off.
" will be shown in the display.
2. If the program mode is exited by one press of the "
remain in memory.
3. If the "
"once and then insert a disc to start
•
The program still remain in the memory when "
PROGRAM EDITION
To add:
To add additional tracks to your selection during program playback, press "
first and then press " PROGRAM " button repeatedly until "00" flashes in the display.
Repeat the above step 2 and 3 to store additional tracks.
To check:
Press " PROGRAM " button lightly during programming before you press "
Each time " PROGRAM " button is pressed the program number appears in the display
window.
To change: When checking press either skip button to alter the track number for the program
currently displayed. Press " PROGRAM " button to register the newly selected track
into memory.
To delete: Opening the CD door will result in any Programmed memory being deleted.
CLEANING THE UNIT
" appears in the
Do not use volatile chemicals on this unit. Clean by lightly wiping with a soft cloth.
CLEANING A CD
" appears in the
If the CD skips or will not play, the disc may need to be cleaned.
Before playing, wipe the disc from its centre to its outer edge with a soft cleaning cloth. After
playing, store the disc in its case.
HANDLING THE DISC
Only touch the CD on the edge to avoid finger prints on its surface.
Do not stick paper or tape nor write anything on the surface of the CD.
" button.
" button
" or "
" button to select the desired track.
" button, all the program will still
" button is pressed a second time then the stored program will be erased.
" button is pressed.
MAINTENANCE
TROUBLE SHOOTING GUIDE
Should any problem persist after you have made the following checks, consult your nearest service
facility.
DISC PLAY DOES NOT START:
•
The disc is inserted upside down or incorrectly. Insert the disc correctly with the label surface
up
•
Dusty or defective disc
•
Dirty or dusty lens
•
The disc compartment lid is not closed
•
Moisture condensation-> leave the unit in a warm place until the moisture evaporates
•
The AC power adaptor is not plugged into the wall outlet
•
The unit is not placed on a level surface
•
Weak batteries
NO SOUND FROM THE HEADSETS:
•
The headphones / earphones plug is not firmly connected to the "PHONES" jack.
•
Adjust the volume control
•
Dirty plug
NO SOUND FROM THE CONNECTED SPEAKERS:
•
Check the connections
•
The amplifier is not turned on
SKIPPING OF SOUND:
•
Dirty or defective disc
•
Dirty lens
•
Strong vibration
WHEN USING WITH BATTERIES THE BATTERY LIFE IS SHORT:
•
Manganese batteries are used. Use alkaline batteries.
DISPLAY WINDOW SHOWS "
" ERROR MESSAGE AND THE UNIT CANNOT BE OPERATED:
" button
•
No disc, dirty or scratched disc. The unit will return to power off after approx. 30 seconds, or
reset the player by pressing "
" button once and then insert a disc to start playing.
" button.
SPECIFICATIONS
GENERAL
OUTPUT (at 1KHz 0dB level): Headphones / earphones (stereo mini-jack)
15 mW+15mW at 16 Ohms to 32 Ohms
POWER REQUIREMENTS:
3V
(2 x AA / LR6 / MN 1500) alkalline batteries,or
DC IN 6V, 350mA power adaptor
Polarity of plug
DIMENSIONS:
Approx. 140 X 27 X 162 mm (W/H/D)
OPERATING VOLTAGE:
U.S.A., Canada:
Middle East and Australia:
120V AC ±5% 60Hz
240V AC ±5% 50Hz
Output (at 1 KHz 0 dB level)
Chile:
Singapore, Malaysia & Thailand
230V AC ±5% 50 Hz
200-240V AC ±5% 50 Hz
We continually strive to improve our products, specifications may change without notice.
UK and Germany
230V AC ±5% 50 Hz
Japan
100V AC ±5% 50/60 Hz
811-830091-012
PRINTED IN CHINA
Advertisement
