EB918D Contents Wear protective gloves. Symbols used in this manual ..2 Symbols on the power tool ..2 Wear safety shoes. For your safety ....2 Noise and vibration .
Page 3
EB918D machine by a person respon-sible Do not operate power tools in explosive atmospheres, such as in the presence of for their safety. flammable liquids, gases or dust. Power Never allow children or people tools create sparks which may ignite the unfamiliar with these instructions dust or fumes.
Page 4
EB918D Prevent unintentional starting. Ensure the Maintain power tools. Check for switch is in the off-position before misalignment or binding of moving parts, connecting to power source and/or battery breakage of parts and any other condition pack, picking up or carrying the tool.
Page 5
EB918D Safety instructions for hedge Use the unit in dry conditions only. Protect it from rain and moisture. trimmers Ensure that the cutter does not touch the Keep all parts of the body away from the ground or other objects.
Page 6
EB918D Safety instructions for the battery Safety instructions for Li-ion charger batteries Keep the battery charger away from rain or Do not open the battery. There is a risk of a short-circuit. moisture. Penetration of water in the battery charger increases the risk of an ...
EB918D Noise and vibration NOTE Values for the A-weighted sound pressure level and for the total vibration values can be found in the “Technical specifications” table. CAUTION! The indicated measurements refer to new power tools. Daily use causes the noise and vibration values to change.
EB918D Overview Insertion slot for battery Protection hood Release button for battery Handle LED state of charge indicator On/Off switch Battery* Switch interlock Shoulder belt EB20(2.0Ah) Battery charger Fastening loop for shoulder belt Lower shaft EBC05(0.5A), EBC20(2.0Ah) Front handle Upper shaft...
EB918D Technical specifications Instructions for use WARNING! Appliance Hedge trimmer Switch the unit off and remove the battery under the following conditions: if the unit is left unattended; – Type EB918D before checking, cleaning or performing – Nominal voltage other work on the unit;...
Page 10
EB918D Inserting/replacing the battery Assemble the shafts Charging the battery as described in the Please plug the shafts together as user manual of the charger. illustrated(1). Tighten up the shaft coupling(2). Press the charged battery into the power tool until it clicks into place.
Page 11
EB918D Work instructions Switching off Check that all parts are firmly attached Release the On/Off switch. and obviously undamaged. Look over the working area and remove any obstructions. Remove all foreign objects from the Battery state of charge hedge, such as wire or other parts, as ...
EB918D Cutting techniques Dispose of the clippings properly and in an environmentally friendly manner. The hedge trimmer can be guided with its Cutting times: double-sided cutters forwards and back- – Deciduous hedges – June and October wards or in an oscillating movement from –...
EB918D Spray the cutter bar with maintenance oil Fertilisers and other garden chemicals to ensure that the hedge trimmer has contain substances which may have a a long service life. Preferably use highly corrosive effect on the metal parts environmentally friendly lubricants, of the unit.
EB918D Guarantee -declaration of conformity We hereby declare, that the following product This product has been manufactured to the in it‘s design and construction put by us into highest quality standards. When a new pro- circulation is in accordance with the appro-...