Advertisement

Content Information ..................................................................................... 1
1
Important Safety Instructions ................................................................ 2
2
Support ................................................................................................ 5
3
Appropriate use .................................................................................... 6
4
Conformity ............................................................................................ 6
5
Mounting - Dismantling ......................................................................... 7
5.1
Stand mounting ........................................................................................... 7
5.2
Wall mounting ............................................................................................. 8
6
Operating elements and connection ...................................................... 9
Status indicator ..................................................................................................... 9
6.2 Connections ................................................................................................. 10
6.3 Operation ...................................................................................................... 11
7
Menu-Settings .................................................................................... 12
7.1
Luminance ................................................................................................ 12
7.2
Image Setup ............................................................................................. 12
7.3
Color Setup ............................................................................................... 13
7.4
OSD Setup ................................................................................................ 13
7.5
Reset ......................................................................................................... 13
7.6
Extra .......................................................................................................... 14
8
Select input source ............................................................................. 14
9
Standby .............................................................................................. 14
10 Troubleshooting .................................................................................. 14
11 Specification ....................................................................................... 16
12 Warranty Condition ............................................................................. 18
ODYS i27
1

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the ODYS i27 and is the answer not in the manual?

Questions and answers

Summary of Contents for Axdia ODYS i27

  • Page 1: Table Of Contents

    ODYS i27 Content Information Content Information ..................1 Important Safety Instructions ..............2 Support ....................5 Appropriate use ..................6 Conformity .................... 6 Mounting - Dismantling ................. 7 Stand mounting ................... 7 Wall mounting ..................... 8 Operating elements and connection ............9 Status indicator .....................
  • Page 2: Important Safety Instructions

    ODYS i27 Important Safety Instructions Read these instructions. Keep these instructions. Heed all warnings. Follow all instructions. Do not use this apparatus near water. Clean only with dry cloth. Do not block any ventilation openings, install in accordance with the instructions.
  • Page 3 ODYS i27 15) No naked flame sources, such as lighted candles, should be placed on the apparatus. 16) The use of apparatus in moderate climate. WARNING To reduce the risk of fire or electric shock, do not expose this apparatus to rain or moisture.
  • Page 4 ODYS i27 Warning High voltages are used in the operation of this device. Do not remove the cabinet back from your set. Refer servicing to qualified service personnel. To prevent fire or electrical shock hazard, do not expose the device to rain or moisture.
  • Page 5: Support

    ODYS i27 Tips regarding environmental protection At the end of its operating life, this product may not be disposed of by way of your normal household waste. Instead it must be delivered to a collection point for recycling electrical and electronic equipment. The icon on the product, in the operating instructions or on the packaging, indicates this.
  • Page 6: Appropriate Use

    Moreover, it will result in the immediate loss of guarantee. The manufacturer does not bear any liability for damages caused due to improper use. Conformity We, Axdia International GmbH, hereby declare that this device corresponds to the basic requirements and relevant regulations outlined in guidelines 2014/53/EU and 2009/125/EC.
  • Page 7: Mounting - Dismantling

    ODYS i27 Mounting - Dismantling 5.1 Stand mounting 1. Open the carton, remove the monitor and place it on a soft surface. 2. Install the base bracket in the base pair interface, insert a screw and tighten it with a screwdriver.
  • Page 8: Wall Mounting

    ODYS i27 5.2 Wall mounting Fasten your wall bracket to the threads on the back and observe the hole spacing. For the wall mounting two persons are required. Please follow the mounting instructions of the wall bracket used and use screws with a length of 8 mm.
  • Page 9: Operating Elements And Connection

    ODYS i27 Operating elements and connection Status indicator The blue status display provides information about the current device status at any time. Status display off Monitor off. Status display on Monitor on. Power button flashing Monitor in stand-by...
  • Page 10: Connections

    ODYS i27 6.2 Connections Power supply (DC 12V) HDMI (1.4) Headphone Type-C Note The USB TYPE-C port supports up to 15W fast charging of external USB-C devices. A USB Type-C cable is not included. Please note that should also support 15W charging.
  • Page 11: Operation

    ODYS i27 6.3 Operation Use the multifunction button on the back to operate the device and to open the settings menu. Note The main menu is only available when an input signal is present. Without a signal, only manual selection of the input source is possible.
  • Page 12: Menu-Settings

    ODYS i27 Menu-Settings Select the desired settings menu with the ▲▼ buttons. Press the M key to open the menu. Press the ▲▼ keys to select a setting and confirm with M key. Press the ▲▼ keys to change the setting. Confirm the setting with M key.
  • Page 13: Color Setup

    ODYS i27 Color Setup Color Temp. Warm Normal Cool User 0-100 Green 0-100 Blue 0-100 LowBlue Mode Weak Medium Strong OSD Setup Language Deutsch, English H.Position 0-100 V.Position 0-100 Timeout 5-100 Transparence 0-100 Reset Reset...
  • Page 14: Extra

    ODYS i27 Extra HDMI Input Select Type-C Mute Volume 0-100 FreeSync Select input source This device includes several input sources. If only one source is connected, the selection of the active input source is automatic in the default setting. Via the menu item "System", you can select the source manually and also deactivate the automatic selection of the active source.
  • Page 15 ODYS i27 Power cable is - Check if the display and loose. the junction box are well The Indicator connected to the power LED is off The screen is supply and if the display switched off. is in shutdown mode...
  • Page 16: Specification

    ODYS i27 11 Specification 27” Panel size Viewing angle H:178º,V:178º Response time (Panel) 14 ms (OD 8ms) Contrast ratio 1000:1 Optimal working resolution 1920(H) ×1080(V) @100Hz Power input DC 12V/4A Work environment 0℃~40℃ Storing environment -20℃~+60℃ 10%~90% Weight 3,3kg Specifications are subject to change without notice.
  • Page 17 ODYS i27 Product information about the energy efficiency of this device according to EU regulation (EU) 2019/2013 can be found on the following website of the European Union. To open, please scan the following QR code with your cell phone.
  • Page 18: Warranty Condition

    12 Warranty Condition Axdia International GmbH, Hanns-Martin-Schleyer-Straße 36-38, 47877 Willich, hereinafter referred to as AXDIA, grants to consumers for products of the brands ODYS and DYON hereinafter referred to as product a limited warranty represented by the following warranty conditions. By this warranty, AXDIA...
  • Page 19 8. If the device has built-in data storage, the customer is responsible for backing up the data before sending back the device. Axdia is not liable for data loss from clients' devices that are sent in. Axdia reserves the right to restore the factory settings on devices that are sent in.
  • Page 20 2. AXDIA Service Center will try to diagnose and solve your problem. If it is determined that a warranty claim exists, you will be given an RMA number (Return Material Authorization) and you will be asked to send the product to AXDIA.
  • Page 21 ODYS i27 Service outside of warranty AXDIA can refuse any service claim made that is not covered by the warranty. If AXDIA agrees to provide a service outside the warranty, the customer will be invoiced for all repair and transport costs.

Table of Contents