Summary of Contents for Cotech PPCR-SKST
- Page 1 USER GUIDE MU-PPCR-SKST-2023 PPCR-SKST SNOW PLOW READ THIS MANUAL CAREFULLY AND KEEP IT AT HAND AT ALL TIMES...
-
Page 2: Table Of Contents
Installation ································································································ 12 Running-in ································································································ 13 Principle of use ························································································· 14 Maintenance ························································································· 15-17 Troubleshooting ························································································· 18 Warranty ··································································································· 19 Parts ······································································································· 20 PPCR-SKST : Quick attach detail (ALL MODEL) ················································································ PPCR34712-HD-JA-SKST: Parts detail ······················································ 22-26 PPCR34712-HD-JA-SKST: Structure detail ······················································ 27... -
Page 3: Introduction
INTRODUCTION TO THE PURCHASER All products are designed to give safe, dependable service if they are operated and maintained according to instructions. Read and understand this manual before operation, and keep it in your files for further reference. This manual has been prepared to assist the owner and operators in the safe operation and suita- ble maintenance of the equipment. -
Page 4: Safety Information
The Product(s) described in this Publication are designed and manufactured only for the country in which they are initially wholesaled by Cotech. Cotech does not provide parts, warranty or service for any Product which is re-sold or retailed in any country other than the country for which the Product(s) were designed or manufactured. - Page 5 GENERAL SAFETY INFORMATION Children Tragic accidents can occur if the operator is not alert to the Do not operate the machine/implement that is presence of children. Children are generally attracted to defective or has missing parts. Make sure that all machines and the work being done.
- Page 6 GENERAL SAFETY INFORMATION Check all machine controls regularly and adjust If the implement starts to vibrate abnormally, where necessary. Make sure that the brakes are disengage the PTO, stop the engine immedi- evenly adjusted. Periodically check all nuts and ately and check for cause. Excessive vibration bolts for tightness, especially wheel hub and rim is generally a sign of trouble.
- Page 7 GENERAL SAFETY INFORMATION Check all controls regularly and adjust MAINTENANCE where necessary. Make sure that the brakes are evenly adjusted. ALWAYS USE GENUINE PARTS WHEN REPLACE- Periodically check all nuts and bolts for MENT PARTS ARE REQUIRED tightness, especially wheel hub and rim nuts.
- Page 8 GENERAL SAFETY INFORMATION Back to table of contents...
- Page 9 GENERAL SAFETY INFORMATION (1) Safety stand 2) Secure point for safety stand Back to table of contents...
-
Page 10: Description
• The front extensions of the PPCR are reinforced to remain absolutely rigid when open, resulting in a seamless cleared pass • The angled design is exclusive to Cotech. Its purpose is to minimizes the risk of frost buildup allowing for continuous unhindered operation. - Page 11 DESCRIPTION This snowplow is designed to be mounted on a skidsteer compact wheel or track loader. The revolutionary PPCR-SKST skid steer attachment includes a mechanical float, a lateral float system and a trip system, all in a single mechanism • It absorbs the acceleration and deceleration of the skid steer while keeping constant downward pressure •...
-
Page 12: Installation
INSTALLATION MODEL vs MACHINE PPCR type snow plows must be installed on the correct skid steer loader. Refer to the table below: Model HP min-max Weight min-max (lbs) Quick attach PPCR30610-SKST 45-65 4 000 to 5 000 Skidsteer PPCR30712-SKST 45-65 4 000 to 7 000 Skidsteer PPCR34712HD-SKST... -
Page 13: Running-In
RUNNING-IN Although there is no break-in specific to PPCR –SKST, there are mechanical checks that must be made to en- sure the long term integrity of the unit. When using the machine for the first time, follow this procedure: A. Before using: 1. -
Page 14: Principle Of Use
PRINCIPLE OF USE Make sure that the blades of the PPCR plow are perpendicular to the ground. To exert ground pressure with the plow, adjust the blade height with the loader control lever. Remember that when driving or when plowing the snow plow is more susceptible to damage when the extensions are open. -
Page 15: Maintenance
MAINTENANCE SAFETY DURING MAINTENANCE • Read operator's manual and understand all safety items before operating or servicing machine. • Place the machine on the ground, stop the engine, place all controls in neutral, set the parking brake and remove the key from the ignition before servicing, adjusting or repairing. •... - Page 16 Keep all the parts clean and do not forget to grease them using the grease nipples provided for this purpose. Replace worn or damaged parts with genuine Cotech parts. For repairs, call a qualified technician at your dealership. Back to table of contents...
- Page 17 STORAGE At the end of the season, wash and inspect all major parts of the snow plow. Repair or replace worn or dam- aged components. • Inspect all parts to see if anything is wrong. Repair or replace worn or damaged components. •...
-
Page 18: Troubleshooting
TROUBLESHOOTING ISSUE SOLUTION Check the electrical operation of the hydraulic selector. Rotating sides do not rotate. Check the hydraulic connections It is possible that a mechanical failure prevents the ro- tation. Check that the hydraulic cylinder is intact and that it is still well fixed to the panel. Check that a me- Only one rotating side rotates chanical part is not deformed and that it prevents free rotation. -
Page 19: Warranty
If required, defective parts may need to be returned to the Cotech factory. If this is the case, the shipping costs will be incurred by Cotech. The dealer is committed to keeping the parts and packing the parts for shipping at no additional cost. -
Page 20: Parts
PLAN OF PARTS It should be noted that snow plow models have changed over the years. The serial number of your snow plow is essential to obtain the correct parts. Back to table of contents... -
Page 21: Ppcr-Skst : Quick Attach Detail (All Model)
PPCR-SKST : Quick attach detail (ALL MODEL) Back to table of contents... -
Page 22: Ppcr34712-Hd-Ja-Skst: Parts Detail
PPCR34712HD-JA-SKST : Parts detail, page 1 Back to table of contents... - Page 23 PPCR34712HD-JA-SKST : Parts detail, page 2 Back to table of contents...
- Page 24 PPCR34712HD-JA-SKST : Parts detail, page 3 Back to table of contents...
- Page 25 PPCR34712HD-JA-SKST : Parts detail, page 4 Back to table of contents...
- Page 26 PPCR34712HD-JA-SKST : Parts detail, page 5 Back to table of contents...
-
Page 27: Ppcr34712-Hd-Ja-Skst: Structure Detail
PPCR34712HD-JA-SKST : Structure detail, page 1 Back to table of contents...
Need help?
Do you have a question about the PPCR-SKST and is the answer not in the manual?
Questions and answers