Table of Contents
Advertisement
5.
Place the focus on Accessibility, and press the Select button to open the menu.
The menu will appear with
6.
press the Select button.
A menu appears with the options to change
7.
8.
Select the menu using the directional buttons, and then press the Select button.
The menus are activated when
Running the Accessibility menu functions using Bixby
This function is available only if Voice Assistant is set to Bixby. (
Privacy
Voice
Voice
Bixby may not be supported depending on the model or geographical area.
To use Bixby, the TV must be set up and tuned and must be connected to the network. You can connect the TV to the
network during the initial setup or do it later through the settings menu.
There are many commands you can say to control the TV. These can be used together with
voice input and voice output. You can use the Samsung Smart Remote but the TV must be connected to the network.
To speak a command, press and hold the
below the small LED(microphone) and above the directional button) and say the command, and then release the
button. The TV will confirm the command.
For example you can:
• Turn Voice Guide on
Press the
button on the Samsung Smart Remote, and then say "Voice Guide on".
• Turn Audio Description on
Press the
button on the Samsung Smart Remote, and then say "Audio Description on".
• Turn High Contrast on
Press the
button on the Samsung Smart Remote, and then say "High Contrast on".
Voice Guide Settings
Voice Guide
Voice Guide
is on.
Try Now
Assistant)
button (located near the top of the Samsung Smart Remote, directly
as the first selection. Highlight
and Volume, Speed, Pitch,
Menu
- 270 -
Voice Guide
Settings, and then
TV Background
Volume.
Settings
All Settings
Voice Guide
to give you
General &
Advertisement
Table of Contents
