Table of Contents
Advertisement
h) Need not exit from ISP burning interface and only repeat the process c）and e）to go on
burning software for other sets;
Note 3: On-line burning and upgrading method from a USB port:
a) Be sure to format a USB disk as FAT32;
b) Copy program file to the USB disk with the name "AP.bin";
c) Power on, press key "SOURCE" and number keys "2, 5, 8, 0" in turn to enter into initial
factory menu at any channel;
d) Enter into factory menu item "software upgrade", select "confirm" to search AP.bin stored
in USB disk automatically to upgrade the software; upgrade progress is below:
1) Reading USB disk,a prompt " Searching USB" will display and an USB disk indicator light
is twinkling ;
2) Burning Flash, prompts "Updating! Please don't power off!!!" and "upgrading schedule"
will display at the same time, after the burning process completed the set will re-start
automatically.
e) Start up the set again, enter into factory menu to confirm software version and time
parameters; then execute "RESET ALL" to complete the whole burning process;
f) Method of burning from USB could not be sure to be suitable for all kinds of USB disks, so
please try other USB disks if necessary.
Advertisement
Table of Contents
