Download Print this page
Valcom V-9975 User Manual
Valcom V-9975 User Manual

Valcom V-9975 User Manual

Seven band equalizer

Advertisement

Quick Links

INTRODUCTION
These instructions contain the specifications and
information necessary to install, operate, and
maintain the V-9975, Seven Band Equalizer.

SPECIFICATIONS

Features
7 active filters
Modified 1 octave equalization
+ 12 dB boost or cut
Constant Q equalization
Power "ON" indicator
Bypass switch to remove EQ from circuit
(slide type)
High impedance output
Line output
Nominal Specifications
Type of Inputs:
Hi impedance 10K Ohms (unbalanced)
Stereo HiZ 10K Ohms (unbalanced)
Type of Outputs:
Hi impedance 10K Ohms (unbalanced)
Frequency Response:
Distortion:
Frequency Centers:
Power Requirements
-24VDC
150 mA
Dimensions/Weight
5.7" H x 8.1" W x 2.5" D
(14.5cm W x 20.6cm H x 6.4cm D)
2.8 lbs. (1.27 kg)
V-9975
SEVEN BAND EQUALIZER
Line (balanced)
35Hz-20kHz +1dB
< 0.3%
Band 1 = 60 Hz
2 = 200 Hz
3 = 560 Hz
4 = 1100 Hz
5 = 2200 Hz
6 = 4500 Hz
7 =10000Hz
Environment
Temperature:
Humidity:
OPERATION
The V-9975 is used to boost or attenuate specific
frequencies to improve voice intelligibility or
attenuate frequencies to help reduce feedback. The
unit can also be used to modify the frequency
response of speakers.
A "POWER" indicating LED, 7 slide controls (1 for
each of the bands), and an "EQ" bypass switch are
located on the front of the unit. The frequencies
boost/cut (1 to 12 dB), are modified with each filter's
slide control. The manual "EQ" bypass switch allows
comparison of before equalization, and after effect, in
the area being equalized. All frequency adjustments
are bypassed when the "EQ IN/OUT" switch is in the
"OUT" position.
INSTALLATION
Connections are accomplished utilizing (3) phono
jacks (2 input, 1 output) and/or (9) screw terminals.
Only qualified service personnel should install the
V-9975. See Figures 1 and 2 for actual connections.
After all connections are made and slide controls
adjusted to the desired positions, close security cover
and tighten locking screws. All connections should
be made and double checked before DC power is
supplied to the unit.
1
VSP-V-9975
Issue 4
0 to 50 Degrees C
0-85% non-precipitating
947006

Advertisement

loading
Need help?

Need help?

Do you have a question about the V-9975 and is the answer not in the manual?

Questions and answers

Summary of Contents for Valcom V-9975

  • Page 1: Specifications

    SEVEN BAND EQUALIZER INTRODUCTION These instructions contain the specifications and information necessary to install, operate, and maintain the V-9975, Seven Band Equalizer. SPECIFICATIONS Features 7 active filters Modified 1 octave equalization + 12 dB boost or cut Constant Q equalization Power "ON"...
  • Page 2: Technical Assistance

    This warranty is in lieu of and excludes all other warranties, expressed or implied, and in no event shall Valcom, Inc. be liable for any anticipated profits, consequential damages, loss of time or other losses incurred by the buyer in connection with the purchase, operation, or use of the product.
  • Page 3 FIG URE 1 - CO NNECTIO NS 6 0 H z 2 0 0 H z 5 6 0 H z 1 1 0 0 H z 6 0 H z 2 0 0 H z 5 6 0 H z 1 1 0 0 H z L IN E O U T AU D IO O U TP U T...