Preset Tuning - Technics SA-EX320 Operating Instructions Manual

QUARTZ LOEK CSTEREO)
—
pn
%ғ%%ееаебаваеававе ее
Operation ШЕ
MEMORY
MANUAL-AUTO
Listening to radio broadcasts |
wae --- --
Preset tuning
Presetting radio stations into the memory channels of this unit
makes selecting stations simple.
A total of 30 FM and AM stations can be preset.
Please remember this
If a new broadcast station is preset into a channel, the setting for
the broadcast station which was previously entered in that channel
will be automatically erased.
Automatic memory presetting
Automatic memory presetting allows this unit to automatically
search for broadcast stations and then preset them into memory.
With this method, the channels that can be preset into the memory
are set as follows for different bands (FM or AM).
When FM stations are preset,
For FM stations... ......... erri rcncoe и ланд 1-30
When FM and AM stations are preset,
For.FM;stations.; seat нний 1-20
For AM stations... seem emnes Є IQ)
Set to the frequency from which you want to
start automatic memory presetting.
(See page 15.)
Press MEMORY until the frequency begins to
change.
(Automatic memory presetting will start.)
During automatic memory presetting, the memory indicator
will flash while the frequency scrolls.
To stop, press MEMORY once again.
When a broadcast station is preset E
The memory indicator and the preset channel number will be
displayed for approximately 1 second.
When presetting is completed
The last broadcast station to be preset will be displayed.
Frequencies may not be preset correctly in cases where the
broadcast waves are too strong or too weak. In such cases, carry
out presetting manually. (See page 17.)