Download Print this page

Pioneer PD-T303 Service Manual page 82

Twin tray compact disc player
Hide thumbs Also See for PD-T303:

Advertisement

Available languages

Available languages

@
TRACK SEARCH
keys (<<, p>!)
During
normal
playback,
programmed
playback
or pause
modes, these keys are pressed to search for the desired track.
Pressing either key causes the player to advance to the next
track or to return to the previous track. Even in stop mode,
these keys can be used to select the desired track. Press the
play key to playback the desired track.
If the PROGRAM
MEMORY key is pressed when the player is stopped to set the
program mode, the performance time of each track is displayed
each time the track search key is pressed.
PROGRAM
MEMORY
key
Use to program a sequence of tracks.
@ Press this key after selecting a desired disc and track with
disc select and track search keys. Tunes will be added to
the program in the order in which they are specified.
RANDOM PLAY key
Press: to begin random playback.
PD-T303
(2) STOP/CLEAR key ( @ )
Press to stop playback. When pressed, the player goes into
stop mode and all operations stop.
Press to clear a program. When pressed during stop mode, the
program stored in memory is cleared.
PAUSE key (HB)
Press to temporarily interrupt playback. When pressed again,
the pause mode is cancelled and playback resumes.
PLAY key (P)
Press to begin playback, and to cancel the pause mode.
Disc select keys (DISC I, DISC Il)
DISC |: Use to select DISC | for playback or programming.
DISC Il: Use to select DISC Il for playback or programming.
@ During playback, when the disc select key for the disc not
being played is pressed, the current playback will stop and
playback of that disc will begin.
REAR PANEL
LINE OUT
terminal
LO
2
jE,9)
INF
Power cord
CONTROL
OUT terminal
This terminal is for further relaying remote control signals to other
components carrying the Pioneer
mark.
Please connect to
the contro! input terminal of the other component.
CONTROL IN terminal
This terminal is for inputting the remote control signals relayed
from an amplifier with a sensor for receiving control signals from
a remote control unit and carrying the Pioneer
mark. For
instructions regarding connection and operation, please refer to
the operating instruction manual for your stereo amplifier.
a7

Advertisement

loading

This manual is also suitable for:

Pd-t503Pd-t303-sPd-t403