Table of Contents
Advertisement
|
]
|
|
c
]
:
i
Oporation of graphic equalizer
@ Demonstration procedure
This feature makes it possible to check the equalizer effects botb visually and audibly.
@) Select the desired input source on the amplifier.
pene
—
SPECTRUM ANALYZER
INPUT
SELE
DR
ia
~
—
DEMO (Demonstration) ee
Play music.
REFERENCE (R1) 1~5
REFERENCE2 (R2) 1~5
@) Play the source.
Each press changes
MANUAL (M) 1~5
@ Select DEMO with the DISPLAY key.
the display mede:
REC MODE
@ Demonstration is repeated in the following cycle.
Al LINK
Al AUTO
* Press the
key to stop demonstration.
mi EGRUS
¢ During Al LINK demonstration, the Surround made also changes.
or
F
« if the demonstration is started while the unit is in the Surround mode,
Selecting "DEMO" starts
the Surround mode will be turned OFF during demonstration.
sequential demonstration.
@ Operation of Al AUTO (for CD play only)
When playing a CD with the presence effect OFF, the equalizer curve suitable
for a specific disc is set automatically by simply
presing the Al AUTO key.
in disc are
TRACK lights up.
2
indicated.
Check that the presence mode is OFF.
2 Press the Al AUTO key.
AI AUTO
/Al
FOCUS
Completes
and stops in
Spectrum analyzer displey
about 30 seconds.
Graphic equalizer display
Lights up.
e Wait for about 30 seconds until |EQ.ON | and
Al AUTO}
light up.
The playback starts automatically.
Note:
In step 2, the other keys than the
[Al AUTO/A! FOCUS}
and the
|POWER|
key do not operate.
To cancel Al AUTO
AI AUTO
/ALFQOUS
Goes off.
® If it is canceled during Al AUTO setting operation, the last
pattern selected before is displayed.
10 GE-560 (En)
Advertisement
Table of Contents
