Version 1.2 (Oct, 2023) No part of this document may be reproduced or transmitted in any form or by any means, electronic or physical, for any purpose without the express written permission of Panini. Panini S.p.A. Via Varallo 24b – Torino, Italia...
Page 2
BioCred User Guide Version 1.2 (Oct. 2023) DATE Version Reference DESCRIPTION User guide for BioCred product version 1.0 that includes: • Fingerprint credential process (enrollment, verification, restore) System ver: 00010000 • ID card scanning BioCredApp ver: 1.0.0 • Electronic Signature 02/10/2023 DisplayApp ver.
• the instruction for a final user – and therefore using BioCred Display UI to drive the device 2. Safety Precautions Before you begin operating or servicing your Panini BioCred as instructed in the User Guide or Service Manual, please make sure you read and understand these important safety instructions: For cleaning operations, refer to the BioCred Cleaning and Maintenance Guide.
BioCred User Guide Version 1.2 (Oct. 2023) 4. Proper Disposal of WEEE European Union (EU) only The symbol of the crossed-out bin on the product means that used electrical and electronic equipment should not be mixed with general communal waste, in accordance with the European Directive (WEEE) and your national legislation.
BioCred User Guide Version 1.2 (Oct. 2023) 5. Unpack BioCred Before unpacking the carton box, examine its condition for any damage received during shipping. If the device, or any component, appears damaged do not use it. File a claim with the shipping company and contact your reseller.
BioCred User Guide Version 1.2 (Oct. 2023) 6. External Part Description This section describes the major components of the Panini BioCred. Front view: Rear view: Touch Display & Standard NFC Antenna USB port for USB/RNDIS Biometric connection or (fingerprint-based) optional USB Wi-Fi...
For instructions about the BioCred first installation, please refer to the “BioCred 1.0 First Installation Guide”. Important: the Enrollment phase, explained later, requires BioCred to have a direct access to an external Panini server, for the creation of the user's encrypted biometric credentials.
Version 1.2 (Oct. 2023) 8. Operator role This chapter describes the functions when activated by the operator. These functions will then start from the Web Application, BioCred follows the process as “slave” device. 8.1 Fingerprint Credential 8.1.1 Enrollment This section describes the user’s biometric encrypted credential creation.
Page 13
BioCred User Guide Version 1.2 (Oct. 2023) Fill in the empty fields in the Customer Data section completed and “Start” form with required user data (all fields must be filled). button enabled NOTE: in this section Operator can flag the checkbox if wants the NFC card.
Page 14
BioCred User Guide Version 1.2 (Oct. 2023) Insert the fingers into the Scan section shows fingers BioCred reader slot and acquisition follow the instructions shown on its display and on the Web The enrollment procedure Scan area informs that the will be repeated 3 times.
This section describes user’s fingerprint verification (customer authentication). This operation enables customer authentication via QR code or NFC card credentials created in 4.1.1 This process can be also activated directly by the user on BioCred Display (see §5.1). Action/Event Result...
Page 18
BioCred User Guide Version 1.2 (Oct. 2023) QR code/NFC successfully All the fields will be filled read and a message will be shown on the BioCred display QR code/NFC NOT The field are empty, and an successfully read error message is displayed.
Page 20
Version 1.2 (Oct. 2023) Depending on the match Fingerprint successfully result, a proper feedback matched message will be shown on the Web App and on the BioCred display. Fingerprint match NOT successful. In this case “Rescan” button is active. NOTE: if the user press the “Rescan”...
Version 1.2 (Oct. 2023) 8.1.3 Restore NFC credential This section describes how NFC user’s biometric encrypted credential can be restored. This process can only be performed by the Operator for security reason, the operation won’t be directly available on BioCred display. Action/Event Result...
Page 22
BioCred User Guide Version 1.2 (Oct. 2023) QR code successfully read All the fields will be filled and a message will be shown on the BioCred display. The fields are not editable. QR code NOT successfully Restore process ends: an...
Page 24
BioCred User Guide Version 1.2 (Oct. 2023) Fingerprint match NOT successful: restore process ends and an error message is displayed (“ERR: Restore not completed. Verification failed”) If the verification NFC card successfully successfully ended, the written: restore process is application starts writing the...
This section describes the plastic card images acquisition (Driver License/ID card etc). This process can be also performed directly by the user using BioCred Display interface. (see § 5.2) NOTE: Card scanner is motorized. Do not push the card inside the reader or hold the card when the motor starts. This would create jams.
Page 27
NOTE: until the user doesn’t remove the card, be shown on the Web App and the rear acquisition doesn’t on the BioCred display start. Front NOT successfully acquired: a Jam is detected. Pressing “Scan” button,...
Page 28
NOTE: “Scan” button is proper feedback message will be shown on the Web App and active and if the Operator on the BioCred display press it a new card acquisition will start The user can Tap on the image shown on BioCred display to zoom the images.
BioCred User Guide Version 1.2 (Oct. 2023) 8.3 Electronic Signature This functionality allows the user to capture a digital signature. This process can also be activated directly by the user on BioCred display (see §5.4) Action/Event Result Web App BioCred display Select “Digital Signature”...
This functionality allows the user to read an NFC tag/Qrcode/Barcode independently by the verification process. BioCred returns the result without interpreting it. This process can also be activated directly by the user on BioCred Display (see respectively §5.5; 5.6; 5.7). Action/Event...
Page 34
In case of Barcode reader, the user can decide if enable, or not, the white or red led. Press “Read” to start the BioCred is ready to read reading NFC/QRcode/Barcode according to the operator selection. “Stop” button is enabled to allow the user to abort the process.
• Save the user fingerprint with a watermark inside to certify it has been collected with a BioCred device This process can only be performed by the Operator with the customer in presence and will not generate a BioCred credential on NFC tag or QRcode.
Page 38
BioCred User Guide Version 1.2 (Oct. 2023) Press “Scan” BioCred shows the area to acquire the signature. “Cancel” button is available to allow the user to abort the process. Insert the fingers into the Scan section shows fingers BioCred reader slot and acquisition.
Page 39
BioCred User Guide Version 1.2 (Oct. 2023) If “watermark” check box is selected, a watermark is embedded into the fingerprint image. If “liveness” check box is selected, the application returns if the fingerprint is valid considered or not (“Liveness Detection pass”...
Version 1.2 (Oct. 2023) 8.6 Fingerprint Watermarking This functionality allows the Operator to verify if a fingerprint image has been acquired by BioCred or not. This process can only be activated by the Operator. It won’t be directly available on BioCred display.
Page 41
BioCred User Guide Version 1.2 (Oct. 2023) Press “Process” If the fingerprint was acquired using a BioCred, a logo will be displayed on top of the fingerprint image. BioCred also tells when and with which device (Ser the impression was acquired...
Version 1.2 (Oct. 2023) 9. Customer role This Chapter describes how the user can operate the different functions. When a functionality is started directly from BioCred, the Web Application is not involved in the process. 9.1 Fingerprint verification Action/Event Result...
Page 43
BioCred shows fingers correctly read, the acquisition acquisition. starts: Cancel (“X”) button is Insert the finger (or fingerS) into the BioCred reader slot enabled. and follow the instructions shown on its display. Depending on the match result, a proper feedback message will be shown on the BioCred display.
Page 44
BioCred User Guide Version 1.2 (Oct. 2023) Fingerprint successfully matched Fingerprint match NOT successful. “X” and “Retry” buttons are enabled. NOTE: if the user press the “Retry” button within 15 seconds, the fingerprint acquisition starts again; else the process is aborted and Home page is displayed.
BioCred User Guide Version 1.2 (Oct. 2023) 9.2 Card Scanner Please note that by default the “Side Detection” is always enabled. Action/Event Result Web App BioCred display Press “Card Scanner” button Front acquisition starts Insert front side Front acquisition in progress na Depending on the fact that the Front successfully acquired.
Page 47
BioCred User Guide Version 1.2 (Oct. 2023) The user can Tap on the image shown on BioCred display to zoom the images Rear NOT successfully acquired: a Jam is detected. Pressing “Retry” button, the rear acquisition starts again 2 fronts acquired –>...
Page 49
Version 1.2 (Oct. 2023) “CLEAR”, “OK” and Put the signature on the white “Cancel” buttons are area enabled on BioCred display If “Clear” button is pressed, the signature is deleted and the user can insert it again If “OK” button is pressed,...
BioCred User Guide Version 1.2 (Oct. 2023) 9.4 NFC reader Press “NFC” BioCred is ready to read NFC card/tag. “Stop” (X) button is enabled to allow the user to abort the process Tap the NFC card/tag on top of If the reading successfully...
Version 1.2 (Oct. 2023) 9.5 QRcode reader Action/Event Result Web App BioCred display Press “QR Code Reader” BioCred is ready to read QR Code. “Stop” button is enabled to allow the user to abort the process Scan the QRcode If the reading successfully...