READ & SAVE THESE INTENDED USE: INSTRUCTIONS ! not for industrial or other commercial applications. Use only with WARNING: SHOCK HAZARD electrical wiring that is in good working order and that meets applicable codes and ordinances. If you have any questions Use your fan only in dry environments.
Page 3
USAGE CAUTION: TO REDUCE THE RISK OF FIRE AND TO PROPERLY EXHAUST AIR, be sure to duct air outside. Fan Operation: Always operate the fan in the upright position Do not vent exhaust air into spaces within walls or ceilings following all instructions and recommendations listed in this or into attics, crawl spaces, or garages.
Page 4
Turning Fan On and Off: (See Fig. 8) If you have the fan with comands in words, see the the «ON/SPEED» button repeatedly To start the fan, press column «Word» in the table below. If you have the fan for the speed settings: 1 – LOW, 2 – MEDIUM, 3 – HIGH. with comands in symbols, see the column «Symbol».
CARE AND MAINTENANCE: FULL FUNCTION REMOTE CONTROL Cleaning: CAUTION-Before cleaning the fan be sure to ON/OFF with with disconnect power cord from the plug. Clean the grille surface Switch SYMBOLS WORDS with a clean damp cloth. Do not use harsh chemical or abrasive cleaners.
Need help?
Do you have a question about the BP2-9A and is the answer not in the manual?
Questions and answers