Advertisement
QUICK START GUIDE
PR-300 Scanning - Adding/Deleting Channels
Exit the Menu
Press the F Key, or it will exit
automatically after an amount of
inactivity.
PLEASE NOTE
Scan List is Per Channel
This means that the change is made to the channel that is selected when the short menu is accessed and, if wanted, each
channel needs to be programmed separately.
Large Scan List May Lead to Missed Messages
This is because the radio must stop for a short time on each channel to check for activity before it moves on to the next one.
The more channels you have, the longer it will take to cycle through the list, and for this reason, we reccomend that the scan
list only has the channels you absolutely need for the best performance of employees.
Repeat
Repeat the process on any
channel that is needed to be
added or deleted to the scan list.
When Finished
At least two channels are needed
for the scan function to work.
Advertisement
