Guide To The Serial Copy Management System - Sony DTC-790 Operating Instructions Manual

|
Additional Information
General section
Power requirements
Where purchased Power requirements
US.A./Canada 120 V AC, 60 Hz
Europe/U.K 220 - 240 V AC, 50/60 Hz
Power consumption 30 W
¥ Dimensions Approx 430 x 122 x 325 mm (w/h/d)
(17 x 47/8 x 127/s inches)
Weight Approx 5.0 kg (11 Ib 0.4 oz)
Remote commander RM-D9 (supplied)
Dimensions Approx 45 x 185 x 20 mm (w/h/d)
(13/16 x 73/8 x 3/16 inches)
Weight Approx 100 g (3.5 oz) incl. batteries
Supplied accessories See page 7.
Design and specifications are subject to change without notice.
Guide to the Serial Copy
Management System
This deck uses the Serial Copy Management System,
which allows only first-generation digital copies to be
made of premastered software via the deck's digital
input jack. An outline of this system appears below:
a
You can record from digital program sources (CDs,
premastered MDs or DATs) onto a DAT or recordable MD
via digital input jack on the DAT or MD deck. You cannot,
however, record from this recorded DAT or MD onto
another DAT or recordable MD via the digital input jack on
the DAT or MD deck.
Playback CD player
a
Digital output jack
Optical cable or coaxial
digital connecting cable
Digital input jack
: DAT deck or
Recording MD deck
v
First-generation
DAT or MD
recorded via
digital-to-digital
connection
DAT or MD
v
DAT deck or
Playback MD deck
Digital output jack Line (analog) output jack
Optical cable or
coaxial digital
connecting cable cord
Audio connecting
Digital input jack Line (analog) input jack
Recording DAT deck or
MD deck
21