13. Default Start-Up State Of The Controller - SoundForce SFC-OB User Manual

How to use the control panel:
• First plug in your SFC-OB
• Then
open the control panel
• The device should be recognized and the message "Connected to SFC-OB" will be displayed
on the left middle container. The firmware version will also be displayed.
• Choose your desired mode in the "plugin mode" dropdown menu and click "Send plugin
mode"
• If desired click on a switch/pot/ in the front panel image and change its CC number in the
left field. When you are done with your changes, click "Save values"
You can save a MIDI map on your computer:
• click Export as text
• click in the filled text field
• copy and paste that list of comma-separated numbers
• save that on a text file on your computer
Similarly, you can copy a saved text field from a text file and paste it in the control panel text field.
Then click "Load text to panel".
You can go back to the factory CC values with the "Reset to factory values" switch. This will cause
the controller to reboot and erase the saved data.

13. Default start-up state of the controller

To change the default start-up state of the switches, you can SHIFT press the DUMP switch. After it
is saved for the first time, it will be loaded by default at start-up. It's loaded but not sent out at start-
up, if you'd like to send it out as a packet use the DUMP switch.
in Google Chrome latest version