Willis Padwell Instructions

Instruction Card (Table of Contents):

Specifications


How to use

Safety Instructions

Warning

FCC

Wireless Charging Best Practices Chart

Specifications
Model Nam: Padwell
Model #: WS-WC-P01
Input: 12V, 2A
Output: 5W ~ 10W
Size (WxDxH): 100 x 100 x 13.7 mm // 3.9 x 3.9 x 0.5 in
Weight: TBD
Designed and Made in South Korea

How to charge your wireless device:

1. Connect the supplied AC wall adapter to the charging base and to the wall outlet.
2. Place the wireless charging-enabled device on the wireless charging base as shown
below. Be sure that the center of the device is aligned over the center of the charging
base. Charging will automatically begin. You will be able to identify the status of your
charge with the LED light indicator (chart below).
3. Enjoy wireless charging.

LED Light Indicator

During Charging
Charging Complete
Charging Error*
*What do i do if my light Indicator is blinking green?
1. Try removing your phone from the charging device and placing it back on the center of
charging pad.
2. Be sure to remove any metal plates/rings on the back of the phone and place the phone
back on the charging device.
3. Try unplugging and plugging the charging adapter and placing the phone back on the
willis. Wireless Charger
Instruction Card Copy
Last edit: 5/16/18
LED Light Indicator Apple Device Samsung Device
Green
Green
Blinking Green
text/icon text/icon
text/icon text/icon
text /icon text /icon