Download Print this page

Bosma DR0001 Quick Install Manual

DOORBELL

Quick Install Guide

Introduction：

DR0001 is an intelligent wireless digital doorbell developed by BOSMA. It

has strong penetrability and long-distance signal transmission. Thanks to

wireless connection, the installation is more convenient because no wiring

is needed. With original and elegant design, the doorbell can match your

home decoration easily and flexibly.

A wireless digital signal is transmitted to the host (BOSMA-X1) when the

doorbell is triggered, the host will make a dingdong and a notification will

be pushed to your smartphone simultaneously, ensuring you never miss

any visitors.

：

Type：DR0001

Wireless range (open area): 200 m

Radio Frequency: 915MHZ

Work Voltage: DC 3.0V (button battery)

Current consumption:

Standby≤600nA Working≤25mA

Work Temperature: -10℃ ～ +50℃

Dimensions: 40*80*10.5mm

Color: White

Table of Contents

Need help?

Do you have a question about the DR0001 and is the answer not in the manual?

Page 1 DOORBELL Quick Install Guide Introduction： DR0001 is an intelligent wireless digital doorbell developed by BOSMA. It has strong penetrability and long-distance signal transmission. Thanks to wireless connection, the installation is more convenient because no wiring is needed. With original and elegant design, the doorbell can match your home decoration easily and flexibly.
Page 2 Button Fig.1 Install Guide 1. How to add? * Make sure the device with gateway (BOSMA-X1) is added correctly and in working status already. ⚫ Tap “+” button at the top-right corner to add device. Long press 3s to wake up the Doorbell (Fig. 2).
Page 3 For families with the aged. ⚫ For big houses. ⚫ For houses with many floors. ⚫ 2. How to install? Remove cover of foam tape on the backside of doorbell, then put it on properly place of wall or door, press and hold for few seconds to make it fixed completely (Fig.
Page 4 This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules.