Table of Contents
Advertisement
Pair the speaker manually
1.
Verify that the Bluetooth function of Bluetooth device is enabled.
2.
Choose the Bluetooth menu in your Bluetooth device, and from the found devices,
select the "Pyle Audio". If you are prompted to enter the PIN code, please enter
"0000" (four zeros).
3.
For more information, see the user manual of Bluetooth device.
4.
After a successful pairing, play the music from the Bluetooth device.
Note:
1.
Only one Bluetooth device can be connected to the speaker. If the speaker is
already connected to another Bluetooth device, the speaker will not appear in the
Bluetooth menu of your Bluetooth device.
2.
When you turn off/on the speaker or the Bluetooth device, the speaker will connect
to the last Bluetooth device it was used with automatically within 10 seconds.
Otherwise, you need to connect it manually on the Bluetooth menu in your Bluetooth
device.
3.
Depending on the device manufacturer, some Bluetooth devices need to perform the
pairing again.
Aux in function
1.
When the speaker is in Bluetooth mode, press the
mode (F3).
2. Connect an audio cable (not included) to the AUX IN JACK of the speaker and to
the audio output socket on the external audio devices such as MP3 player, discman,
etc.
3. Play from an external audio device.
MODE button to select the Aux in
F3
4
Advertisement
Table of Contents
