Table of Contents
Advertisement
TROUBLESHOOTING
Problem
Abnormal heavy vibrations
Carbon rake finger breakage
Noise in the pole
Tool does not start
Tool suddenly stops
All manuals and user guides at all-guides.com
Cause
Improper mounting of the fingers.
Loose rake.
Olive harvester head wear.
Detect faulty tool.
Wear.
Deteriorated pole guide.
Battery drained.
No power to the tool
Others.
Too much pressure on the branches.
Battery drained.
Solution
Reconnect the rake following the
procedure
Tighten the rake.
Check the clearance on the ball and socket,
and contact your dealer if necessary.
Contact your dealer.
Replace the broken prong.
Contact your dealer.
Reconnect to power source.
Contact your dealer.
Contacter votre revendeur.
Use an up and down motion to the
tree/branch.
Recharge the battery.
Advertisement
Table of Contents
