Summary of Contents for Clarke IRT2
- Page 1 INFRARED THERMOMETER MODEL NO: IRT2 PART NO: 4501011 OPERATION & MAINTENANCE INSTRUCTIONS DL1023 ORIGINAL INSTRUCTIONS...
- Page 2 INTRODUCTION Thank you for purchasing this CLARKE Infrared Thermometer. Please read this instruction leaflet thoroughly and follow the instructions carefully, to ensure that the instrument will give you long and satisfactory service. Please keep these instructions in a safe place for future reference.
-
Page 3: Warnings And Cautions
WARNINGS & CAUTIONS WARNING: • This thermometer should NOT be used as a medical thermometer. • Before you use this unit, check on the housing carefully. If there is any damage, DO NOT use • DO NOT point the laser directly at eyes or indirectly off reflective surfaces. -
Page 4: Lcd Display And Buttons
LCD DISPLAY AND BUTTONS Data Hold Icon Celsius Unit Scanning Icon Temperature Reading Laser On Icon Trigger Backlight On Icon 10 Laser On/Off Button Low Battery Icon 11 Celsius/Fahrenheit Switch Button Fahrenheit Unit 12 Backlight On/Off Button Parts & Service: 020 8988 7400... -
Page 5: Operation
OPERATION BATTERY INSTALLATION/REPLACEMENT This unit requires 2 x 1.5V, AAA batteries. To install/ replace the batteries, carry out the following: Open the battery cover by placing your thumb and index finger in the finger indents on the handle and pulling the cover open. - Page 6 Release the trigger and the screen will show the HOLD icon and the last scanned temperature will show for 7 seconds. This unit has a built-in 7 second auto power off function. DISTANCE TO SPOT SIZE When taking a measurement, pay attention to the Distance to Spot Size.
-
Page 7: Locating A Hot Spot
LOCATING A HOT SPOT To locate a hot spot, aim the unit outside of the interested area, keeping the trigger depressed, then scan across with an up and down motion until you locate the hot spot, as shown. MAINTENANCE Lens Cleaning: Blow off any loose particles using clean compressed air (ALWAYS use eye protection when using compressed air). -
Page 8: Product Specifications
154 x 36 x 83mm Weight 102g The details and specifications contained herein, are correct at the time of going to print. However, CLARKE International reserve the right to change specifications at any time without prior notice. Parts & Service: 020 8988 7400... - Page 9 DECLARATION OF CONFORMITY - UKCA Parts & Service: 020 8988 7400...
-
Page 10: Declaration Of Conformity (Ce)
DECLARATION OF CONFORMITY - CE Parts & Service: 020 8988 7400... - Page 11 NOTES -------------------------------------------------------------------------- -------------------------------------------------------------------------- -------------------------------------------------------------------------- -------------------------------------------------------------------------- -------------------------------------------------------------------------- -------------------------------------------------------------------------- -------------------------------------------------------------------------- -------------------------------------------------------------------------- -------------------------------------------------------------------------- -------------------------------------------------------------------------- -------------------------------------------------------------------------- -------------------------------------------------------------------------- -------------------------------------------------------------------------- -------------------------------------------------------------------------- -------------------------------------------------------------------------- -------------------------------------------------------------------------- -------------------------------------------------------------------------- -------------------------------------------------------------------------- -------------------------------------------------------------------------- -------------------------------------------------------------------------- -------------------------------------------------------------------------- -------------------------------------------------------------------------- -------------------------------------------------------------------------- -------------------------------------------------------------------------- -------------------------------------------------------------------------- -------------------------------------------------------------------------- -------------------------------------------------------------------------- -------------------------------------------------------------------------- -------------------------------------------------------------------------- Parts & Service: 020 8988 7400...
Need help?
Do you have a question about the IRT2 and is the answer not in the manual?
Questions and answers