Possibilities Of Multi Play Mode - Kawai K4 Owner's Manual

13 13
Let's Play!
2. Possibilities of MULTI PLAY Mode
This section explains the basic functions of the MULTI PLAY mode.
o
Pa
ne
i=
i)
©
—
"n
57)
ce
@ SPLIT
The keyboard may be divided into a maximum of eight segments and each assigned
a different (SINGLE Patch) tone. For instance, the low range might be assigned to
the bass, the middle range to the piano and the high range to the strings to allow
the playing of several different tones on different parts of the keyboard (ID 1-4).
(See P. 86)
@ VELOCITY Switch
Tones may be changed by varying the amount of force applied to the keys during
play (at a maximum of two settings per key). For instance, key settings may be
made so that a light strike will produce a bass tone, whereas a strong strike will
produce a chopper bass tone. Differing tones may also be combined to produce a
completely new tone (ID 5-8). ( See P. 87)
@ LAYER
A maximum of eight tones may be combined into a single sound. A very fat sound
may be obtained by combining and slightly detuning similar tones, and a
completely new sound created by combining different tones (ID 9-12). (See P. 85)
@ MULTI tone generator
lf each of the MIDI receiving channels of a MULTI Patch is set independently, a
maximum of eight (nine including the DRUM Section) MIDI tone generator modules
may be created. The unit keyboard may be used to play different tones or control
external tone generators while the K4/K4r is played by a computer or MIDI
sequencer such as the Q-80 (ID 13-16). (See P. 83)
All of the above functions may be freely combined in a single MULT! Patch.
STRONG
VELOCITY
STRINGS
LIGHT
: TONE RANGE ; 7
13 13