Vesta Skyra Instruction Manual

Clear ice maker

Hide thumbs

Table Of Contents

Table of Contents

Quick Links

Download this manual

Skyra

Clear Ice Maker

INSTRUCTION MANUAL

Table of Contents

Need help?

Do you have a question about the Skyra and is the answer not in the manual?

Questions and answers

Summary of Contents for Vesta Skyra

Page 1 Skyra Clear Ice Maker INSTRUCTION MANUAL...
Page 2 Introduction Thank you for choosing our Skyra clear ice maker! This brand-new product is designed to bulk produce clear ice in standard shapes, perfect for bars, hotels and other businesses serving cold drinks. Compared with regular non-clear ice makers and traditional clear ice-producing processes, the Skyra ice maker has the following advantages: Produce clear ice that is denser and melts more slowly than cloudy ice.
Page 3: Table Of Contents
Contents Important Safety Instructions ..............3 Product Structure ..................8 Specifications ..................10 Product Features ................... 11 Operation Instructions ................13 Before using ................... 13 How to make clear ice ..............15 How to use Freeze mode ............... 20 Care and Maintenance ................22 Troubleshooting ..................
Page 4: Important Safety Instructions
Important Safety Instructions Only the power supply specified on the machine nameplate can be used with this  machine. Outlet for this machine must meet the national laws and regulations and must  be reliably grounded with leakage protection. Wear gloves when performing maintenance on the motor and the cooling system ...
Page 5 grilles, hazard labels, etc.) and the manufacturer is not responsible for the consequences of violating this instruction. In the event of a fire, use a carbon dioxide fire extinguisher instead of water, and  cool the motor room as soon as possible. Do not use mechanical devices or other means to accelerate the defrosting ...
Page 6 Package and Transportation Packed in wood crates, the machine should be transported with appropriate  equipment, do not move it with bare hands. When using a lifting system, such as forklifts or pallets, pay special attention to  balance and prevent tipping. Normally, the machine should be fixed on wooden pallets to ensure safety ...
Page 7 When handling, do not push or pull the machine to avoid tipping over or  damaging the parts. Do not place any objects on the machine, as it is open from the top.  The machine should be placed in a well-ventilated place, and away from heat ...
Page 8 This marking indicates that this product should not be disposed of with other household wastes throughout the EU. To prevent possible harm to the environment or human health from uncontrolled waste disposal, recycle it responsibly to promote the sustainable reuse of material resources. To return your used device, please use the return and collection systems or contact the retailer where the product was purchased.
Page 9: Product Structure
Product Structure ① ② ③ ④ ⑤ ⑥ ⑦...
Page 10 ⑧ ⑩ ⑨ ⑦+⑧： ①Lid ②Control panel ③Universal wheels ④Hinge ⑤Power port ⑥Drain pipe ⑦Inlet pipe ⑧Ice mold tray ⑨Ice mold ⑩Overflow hole...
Page 11: Specifications
Specifications Model Skyra (Double tray) Power supply 220-240V~50Hz 110-120V~60Hz Ice-making power 480 W 500 W Ice-detaching power 2700 W 2800 W Exterior material Stainless steel SUS201 with brushed finishes Interior material Stainless steel SUS304 Exterior dimensions 34.3" × 29.7" × 33.7" (870 × 755 × 856 mm) Interior dimensions 29.5"...
Page 12: Product Features
Product Features Control panel: ④ ⑥ ② ⑤ ③ ① ⑦ ⑧ Part Description --- Connect to the power supply, and the display will show "OFF". Press the "Power" button, and the machine will enter standby mode, Power showing “ON”. --- In standby mode or during operation, pressing the power button can return to power saving mode.
Page 13 --- In standby mode, long press the “Ice” button for about 3 seconds until the indicator lights up, the water filling process will be skipped. If the initial water temperature is above 20°C, the water heating process will be skipped, and directly enter ice making process. --- During ice-making and in the unlocked state, pressing “Detach”...
Page 14: Operation Instructions
Operation Instructions Before using 1. Place the machine on a flat and stable surface, and allow a distance of ≥ 100mm/3.9" between the machine and the walls or objects to ensure good ventilation. 2. Connect the inlet pipe of the machine to the water supply and the drain pipe to the drainage system.
Page 15 This end is This end is connected to connected to the the water machine The water inlet pipe is a 1/2" internal tooth pipe about 1.2 meters long, which should be connected to the 1/2" external tooth faucet or connecting pipe. 4.
Page 16: How To Make Clear Ice
How to make clear ice Fit the two halves of the molds together with the tongue and groove, and place them correctly in the tray. The ice mold color should be the same with the tray color tag, and the molds should be placed in the correct direction. Tongue Groove Note: When placing the ice molds, please choose the tray with color tag that have the...
Page 17 Ice cube: The ice cube molds and the tray color tag are gray. Each tray can hold 30 molds and the placement direction is shown as follows: Ice sphere: The ice sphere molds and the tray color tag are green. Each tray can hold 16 molds and the placement direction is shown as follows: Ice bar: The ice bar molds and the tray color tag are black.
Page 18 Ice diamond: The ice diamond molds and the tray color tag are purple. Each tray can hold 30 molds and the placement direction is shown as follows: Place the tray with the molds on the support blocks in the machine. Close the lid.
Page 19 button, and the machine will enter standby mode. Press the "Ice" button, the indicator light will turn on, and the machine will start to work: ① The machine is first filled with water, the display shows “ICE1”, and the first indicator light of the progress bar flashes;...
Page 20 Note: ① After entering ice storage mode, if the machine stops (possibly caused by accidentally pressing "Stop/Drain" or "Power"), press and hold the "Freeze" button for about 3 seconds, and the machine will re-enter the ice storage mode. ② In ice storage mode, the last digit on the display indicates the temperature unit. "C" represents Celsius, and "F"...
Page 21: How To Use Freeze Mode
Method 2: Insert the spade between the molds to separate them. Note: It is recommended to use the ice cubes within 12 hours after completing the ice-making process. Keeping the ice cubes in the storage for more than 12 hours may cause changes in their transparency or melting.
Page 22 2. Press the "Freeze" button to start the freeze mode. The display will show the real- time internal temperature, which will be controlled at about 5°F (-15°C). 3. Place items in the compartment and close the lid.
Page 23: Care And Maintenance
Care and Maintenance Unplug the machine before cleaning and maintenance. Regularly clean the machine surface with a damp cloth to remove dust and dirt. Regularly clean and disinfect the molds. It can be washed in a dishwasher and disinfected in a sterilizer cabinet. It is recommended to clean them every 15 days or according to your using situation.
Page 24: Troubleshooting
Troubleshooting Cannot start ▪ Make sure the power cord is plugged into the power outlet. ▪ Check whether the power cord is damaged. If so, do not use the machine. ▪ If not for the above reasons, please contact professionals for maintenance. (The problem may be: the control panel is damaged, the wire connector is loose, etc.) Cannot fill with water ▪...
Page 25 loose, which requires professional maintenance. Cannot detach ice ▪ Try pressing and holding the "Detach" button for about 3 seconds in standby mode to start the ice-detaching process again. ▪ The control panel and power panel may be damaged, or the wire connector may be loose, which requires professional maintenance.
Page 26 When heating water after water- filling or during ice-detaching May be caused by the heating pipe process, the temperature does failure, which requires professional not rise by at least 0.5°C within maintenance. one hour, “HF” will be displayed, indicating heating failure. During heating, if the temperature of the heating tube May be caused by the water pump...