Fcc Statement - Doss SoundBox User Manual

Product Specifica�ons
Output power: 6W x 2
Driver unit: 1.5 inch driver x 2 + 2.6 inch passive radiator
Frequency response: 100Hz-18kHz
Signal to noise ra�o: >=55dB
Unit weight: 560 g
Unit dimension: 6.6 x 2.7 x 2.9 inch
Bluetooth range: 10 meters/ 33�
Warranty: One-year limited
Ba�ery
Type: Li-ion 3.7V
lnput: 5V
Charging �me: 3 hours
Playback �me: up to 20 hours (at 50% volume)
• Fully charge the speaker before ini�al use.
• If the speaker beeps every few seconds, please recharge it for 2-3 hours.
• The speaker has a ba�ery saver mode where it will auto power off without
audio inputs for 15 minutes. To remove the func�on, please contact
<support@dossav.com> for support.
S�ll Got A Problem?
Please feel free to contact our support team at <support@dossav.com>
Warning
DO NOT drop, hit or shake the speaker.
DO NOT disassemble, repair or modify the speaker by yourself.
DO NOT use cleaning products that contain benzene, solvents or alcohol.
DO NOT expose the speaker to excessive heat or direct sunlight for a long �me.
DO NOT store the speaker in a place with humidity or dust.
DO NOT place heavy objects on top of the speaker.
DO NOT use the speaker near a microwave oven or wireless LAN products.

FCC Statement

This equipment has been tested and found to comply with the limits for a Class
B digital device, pursuant to part 15 of the FCC Rules. These limits are designed
to provide reasonable protec�on against harmful interference in a residen�al
installa�on. This equipment generates, uses and can radiate radio frequency
energy and, if not installed and used in accordance with the instruc�ons, may
cause harmful interference to radio communica�ons. However, there is no
guarantee that interference will not occur in a par�cular installa�on. If this
equipment does cause harmful interference to radio or television recep�on,
which can be determined by turning the equipment off and on, the user is
encouraged to try to correct the interference by one or more of the following
measures:
• Reorient or relocate the receiving antenna.
• Increase the separa�on between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which
the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.
Cau�on: Any changes or modifica�ons to this device not explicitly approved by
manufacturer could void your authority to operate this equipment.This device
complies with part 15 of the FCC Rules. Opera�on is subject to the following
two condi�ons:
(1) This device may not cause harmful interference, and (2) this device must
accept any interference received, including interference that may cause
undesired opera�on.
RF Exposure Informa�on
The device has been evaluated to meet general RF exposure requirement.
The device can be used in portable exposure condi�on without restric�on.
2200mAh
1A