imes-icore iVAC eco Operating Manual

Extraction unit

Advertisement

Quick Links

Attention! Do not use the device without reading the operating manual
Operating Manual
iVAC eco
Extraction Unit
imes-icore GmbH
Competence in CNC & DENTAL-Solutions
Im Leibolzgraben 16
D-36132 Eiterfeld

Advertisement

Table of Contents
loading

Summary of Contents for imes-icore iVAC eco

  • Page 1 Attention! Do not use the device without reading the operating manual Operating Manual iVAC eco Extraction Unit imes-icore GmbH Competence in CNC & DENTAL-Solutions Im Leibolzgraben 16 D-36132 Eiterfeld...
  • Page 2: Table Of Contents

    Fig. 1-9 ....................................7-14 12. Circuit Diagram ..................................12 2. EC - Declaration of Conformity We, Messrs. imes-icore GmbH Competence in CNC & DENTAL-Solutions Im Leibolzgraben 16 D-36132 Eiterfeld declare at our sole descretion that the following machine Article designation: ECO...
  • Page 3: Technical Specifications

    3. Technical Specifications iVAC eco Air intake 32 mm Power Unit 1 EC blower (brushless turbine) Rating / protection type S1 / IP 20 Output 1.3 kW Mains voltage 230 V Frequency 50-60 Hz / single phase Power requirement 5.7 A...
  • Page 4: Filter

    - Monthly inspection: Remove deposits in the upstream area of filter chamber No. 15. Remove any major residues. Clean residues from filter cartridge. Check that the hose connector bush fits tightly in air intake No 27a. - Six-monthly maintenance: Change the G4 filter mat No 34. If the filter mat becomes clogged, the turbine can be irreparably damaged through lack of cool air.
  • Page 5: Warranty

    N.B. Irrespective of the condition of the filter cartridge, the red indicator light may come on if the synthetic filter is full. Important • do not wet clean filter cartridge. Do not blast filter cartridge with compressed air • when shaking the filter cartridge, be careful not to damage the surface •...
  • Page 6: Key To Illustrations 1-9

    11. Key to illustrations 1-9 Part name, description Quantity Illustration Main switch: - Position “0” ….eco is off - Position “1” ….eco is on Changeover switch: Position “0” turbine off Position “1” turbine on (remote control via SUB9 port) Position “2” turbine on (direct control by eco) Potentiometer Indicator light, main switch (green) Indicator light, filter level (red)
  • Page 7: Figures

    11. Figures Fig. 1 Fig. 2...
  • Page 8 Fig. 3 13a – 13d Fig. 4...
  • Page 9 Fig. 5 Fig. 6...
  • Page 10 Fig. 7 Fig. 8...
  • Page 11 Fig. 9...
  • Page 12: Circuit Diagram

    12. Circuit Diagram, MINI EC blower 220V/240V, 5,8 A 50/60 Hz, 1300 W Type “H” Ametek Electronic control unit 250 V / 16A Urban Main switch 230 V / 6A Moeller Changeover switch 1-0-2, 230V / 15A Moeller LED 3V - red LED 3V - green Potentiometer Tesla...

Table of Contents