Table of Contents
Advertisement
6/11/23, 12:31
Always route and manage cords and cables connected to your device so they cannot be tripped
over, pulled, or grabbed.
Protect the power cord from being treaded upon or pinched, particularly at the plug, and at the
point where it emerges from the equipment. Ensure that the power outlet is located near the
equipment so that it is easily accessible.
Disconnect the power plug from the power outlet if the device is not being used for a long period of
time.
Please confirm the distribution system installed in the building. The system should provide a circuit
breaker rated at 120/240V, 20A.
Only use attachments/accessories, such as carts, stands, tripods, brackets or tables, specified by
the manufacturer.
When a cart is used, use with caution when moving the cart/equipment combination to avoid injury
from tipping over.
Refer all servicing to qualified service personnel. Service will be required when the unit has been
damaged in any way, such as:
if the power-supply cord or plug is damaged.
if liquid is spilled onto or objects fall into the unit.
if the unit is exposed to rain or moisture.
if the unit does not operate normally or has been dropped.
When using ear-/headphones, adjust the volume to appropriate levels, or hearing damage may
result.
Stability Hazard: The display may fall, causing serious personal injury or death. To prevent injury,
this display must be securely attached to the floor/wall in accordance with the installation
instructions.
Fastening the display to a wall or fixed object using cordage or other restraining devices can help
support the weight of the display in order to prevent the display from falling over.
Hole Pattern (W x H)
100 x 100 mm
https://manuals.viewsonic.com/VP3256-4K_Full_Guide
Interface Pad (W x H x D)
115 x 115 x 2.6 mm
VP3256-4K - ViewSonic Monitor
Pad Hole
Screw Specification & Quantity
Ø 5 mm
M4 x 10 mm - 4 pieces
46/49
Advertisement
Table of Contents
