Intec C-01 User Manual page 10

English
OPERATION GUIDE
NOTE: After selecting the desired pressure with the + and - buttons, the screen will fl ash three times to confi rm
the setting. You can then press the On/Off button to start infl ation.
TO INFLATE A TYRE
1
Start the engine
4
Connect the hose to the tyre
valve
TO CHECK PRESSURE
1
Start the engine
WARNING: DO NOT use the compressor with voltages other than 12Volts
10
2
Insert the plug into the 12V
cigarette lighter socket
5
Press the On/Off button
2
Insert the plug into the
12V cigarette lighter
socket
3
Press the R button to select the
unit of measurement, then the
+ and - buttons to reach the
desired pressure
6
The compressor stops
automatically when the desired
pressure is reached
3
Connect the hose to the
tyre valve
4
The display will indicate
the current tyre pressure