Advertisement
SAFETY INSTRUCTIONS
READ ALL INSTRUCTIONS
1. Do not load with more than 550 pounds.
2. Do not apply an unbalanced load which could cause the
Work Center to tip over.
3. Do not use the Work Center as a step-ladder or standing
platform. Do not use the lower platform as a step. The
footboard is a foot REST only.
4. Do not store Work Center outdoors or in a damp loeation.
5. Avoid applying excessive force when clamping with the
swivel pegs.
6. Be sure that the legs are fully open (for workbench height)
and be sure that the table locks in position.
7. When using a power tool with the Work Center, follow the
safety instructions in the tool's Instruction Manual.
8. Always wear safety glasses when operating power tools.
9. See "Using Power Equipment" in this manual for correct
method of securing power tools in the Work Center. Never
mount power tools directly in vise jaws; pressure may
damage tools.
10. An even pressure of the vise jaws on the work piece is
essential. Tighten both vise jaws uniformly.
11. When assembling your Work Center, use only the Special
Plastic Socket Wrench provided. Use of other wrenches or.
sockets can damage your Work Center.
42v^he tilting brackets must be locked whtleelampingTn both
horizontal and vertical positions.
SAVE THESE INSTRUCTIONS FOR FUTURE USE.
3
Advertisement
