Panasonic PRISM W1 Series Operating Instructions Manual page 10

Please refer to location of controls on page 2.
(1) Aerial Connection
Connect the aerial lead to the socket marked' 1' at the
rear of the TV..
(2) Power Switch
Push to switch the T.V. on, push again to switch off.
(3) Programme Up/Down
Press once to increase or decrease the programme
position by one.
(4) Volume Up/Down
Press the '+' button to increase the sound level.
Press the ' - ' button to decrease the sound level,
displayed as a green bar.
(5) Colour Up/Down
Press the ' +' button to increase the colour level.
Press the ' - ' button to decrease the colour level.
displayed as a red bar.
(6) Brightness Up/Down
Press the '+' button to increase the brightness level.
Press the ' - ' button to decrease the brightness level.
displayed as a white bar.
(7) Contrast Up/Down
Press the '+' button to increase the contrast level.
Press the ' -.' button to decrease the contrast level.
displayed as a cyan bar.
(8) Picture Control
Turn left or right for a softer or sharper picture.
(9) Normalisation Store
Adjust the volume, brightness, colour, contrast, bass,
treble, balance etc. to normal viewing levels. Press
this button to store these levels in the T.V. memory.
(10) Normalisation
If levels of volume, brightness, colour, contrast, bass,
treble and balance have been altered, they can be set
back to their stored levels,by pressing this button.
(11) A.V.Stereo/Mono Selection
Press this button to select AV. stereo or mono
operation. The function indicator on the TV. will
light to show which mode is selected. This button
operates in AV. mode only.
Note: A Stereo VTR connected to the appropriate
AV terminals is required to achieve Stereo
reproduction for this facility.
CD =stTerREO
(12) External Loudspeakers
External loudspeaker terminals are provided at the
rear of the T.V. for the connection of a pair of Hi-Fi
loudspeakers of 48 Ohm impedance. The speakers
are switchable from internal to external by means of
a slide switch situated above the terminals. To se-
lect external speakers, move the switch to the EXT.
position. The internal speakers will be disconnected
when external speakers are selected.
V7 =MONO
(13) Headphones
A 35mm stereo headphone socket is available for
the connection of a pair of 8-300 Ohm impedance
headphones. The T.V. speakers will be automatical-
ly disconnected while the headphones are connec-
ted.
(Optional)