Airlinkplus 32-bit PCI Gigabit Ethernet Card AGIGA32PCI Quick Installation Manual

Quick Installation Guide
Model # AGIGA32PCI
Section 1
1

Installing Hardware

Step 1 Shut down the computer, unplug its power cord, and remove the chassis
cover.
Step 2 Insert the Ethernet card into a PCI slot on the computer and secure it with
a chassis screw.
Step 3 Cover the computer's chassis.
Step 4 Connect an Ethernet cable to the RJ-45 port of the Ethernet card.
Step 5 Re-plug the power cord and turn on the computer.
Ver. 1A
Package Content:
32-bit PCI Gigabit Ethernet
Card
Driver Disk
Quick Installation Guide
Section 2

Installing Driver

Note: The following steps and screen shots are for
Windows XP. Steps for other Windows operating
systems will be noted beneath each screen shot.
Step 1 At the Found New Hardware Wizard, select Install from a list or
specific location (Advanced) and click Next.
Windows 2000: Click Next at the Found New Hardware Wizard. Select
Search for a suitable driver for my device (recommended) and click Next.
Windows ME: Click Next at the Add New Hardware Wizard. Select Specify
the location of the driver (Advanced) and click Next.
Windows 98SE: Click Next at the Add New Hardware Wizard. Select Search
for the best driver for your device (Recommended) and click Next.