Advanced - Uniden evolo PCW 100 Owner's Manual

Once you have set up WEP encryption, you have additional
options for how you connect with other Access Points and
Clients.
The bottom section of the Encryption page allows you to
adjust the following settings:
Default Key: Allows you to select different Keys.
Authentication Type: Gives you the option of how you
access different networks. Using the Shared Key option
restricts you to only access networks configured to your WEP
Key. Using the Open System option, allow you to access
networks without WEP. The default is Auto, which allows
access to both encrypted and open systems.
Note: The Hexadecimal Key must be identical to all Access
Points and Clients on the network in order for this device to
connect to the wireless LAN.
35
Wireless USB Adapter

Advanced

The Advanced screen allows you to set the Preamble Type,
Fragmentation Threshold and RTS/CTS Threshold.
These settings are for very advanced users, and should not be
adjusted without a thorough understanding of the 802.11b
protocol.
The default settings are shown above.
recommended that the defaults be used.
Wireless USB Adapter
It is highly
36